# External feeder assist replacement

**URL:** <https://forum.sovol3d.com/t/external-feeder-assist-replacement/8713>\
**Category:** Sovol SV08 MAX\
**Tags:** klipper, advice, firmware\
**Created:** [September 12, 2025, 2:39pm UTC](https://forum.sovol3d.com/t/external-feeder-assist-replacement/8713 "2025-09-12T14:39:46Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\
**Post date:** [December 1, 2025, 3:01pm UTC](https://forum.sovol3d.com/t/external-feeder-assist-replacement/8713/4 "2025-12-01T15:01:47Z")

</div>

If you’d searched you’d have found this.

> [@Filament feeder failures](https://forum.sovol3d.com/t/filament-feeder-failures/8708/32):
>
> [Macro.cfg](https://forum.sovol3d.com/uploads/short-url/1A3l0RpZllWj4zr9BEkzqAIQr83.cfg) (17.2 KB) [printer.cfg](https://forum.sovol3d.com/uploads/short-url/iUQG0dgJaOILwOxHMpqMnDbTVTS.cfg) (7.7 KB) Compare against your files and replace only feeder references.

---

_[View the full topic](https://forum.sovol3d.com/t/external-feeder-assist-replacement/8713)._