# Everything heats up fine, but it doesn't want to print

**URL:** <https://forum.sovol3d.com/t/everything-heats-up-fine-but-it-doesnt-want-to-print/8597>\
**Category:** Sovol SV06 Plus\
**Created:** [August 28, 2025, 12:40am UTC](https://forum.sovol3d.com/t/everything-heats-up-fine-but-it-doesnt-want-to-print/8597 "2025-08-28T00:40:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![TwiceOnce](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/twiceonce/32/3943_2.png) [@TwiceOnce](https://forum.sovol3d.com/u/TwiceOnce)\
**Post date:** [August 28, 2025, 12:40am UTC](https://forum.sovol3d.com/t/everything-heats-up-fine-but-it-doesnt-want-to-print/8597/1 "2025-08-28T00:40:37Z")

</div>

Title is mostly self explanatory, if you need any pictures of anything, just let me know!

Whenever this happens, I also try to stop the print, but it stays on the processing screen forever.

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [August 28, 2025, 12:54am UTC](https://forum.sovol3d.com/t/everything-heats-up-fine-but-it-doesnt-want-to-print/8597/2 "2025-08-28T00:54:23Z")

</div>

> [@TwiceOnce](#):
>
> Whenever this happens, I also try to stop the print, but it stays on the processing screen forever.

This sounds like a SD Card problem…  
When the SD Card starts to go bad, it will kinda skip things..it can’t read the Gcode properly & will freeze up the printer. Sometimes a format will fix things for a few days, but the issue will come back.

So, before you start to tear things apart trying to fix something, try a different/new SD Card.  
Remember to keep it under 16GB.
