# Error message never seen before

**URL:** <https://forum.sovol3d.com/t/error-message-never-seen-before/10205>\
**Category:** Sovol SV06 ACE\
**Tags:** heat-fails\
**Created:** [July 15, 2026, 6:57pm UTC](https://forum.sovol3d.com/t/error-message-never-seen-before/10205 "2026-07-15T18:57:44Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [July 15, 2026, 6:57pm UTC](https://forum.sovol3d.com/t/error-message-never-seen-before/10205/1 "2026-07-15T18:57:44Z")

</div>

Hello,

Does anyone have any ideas on how to fix this error?

 ![Screenshot_20260715_205220_Chrome](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/1/1ed22bd478e10d5101d8794b32c69463d110234c.jpeg)

---

<div class="post-metadata">

**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\
**Post date:** [July 15, 2026, 7:14pm UTC](https://forum.sovol3d.com/t/error-message-never-seen-before/10205/2 "2026-07-15T19:14:12Z")

</div>

First thing I’d check is for high friction on the Y axis rails. High friction makes the motor work harder.  
If no problem there then have you recently started printing faster? If not I’d expect a partially shorted winding in the Y motor. You can lower the current but that shouldn’t be needed on a printer that has been stable for months.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [July 15, 2026, 7:29pm UTC](https://forum.sovol3d.com/t/error-message-never-seen-before/10205/3 "2026-07-15T19:29:18Z")

</div>

Thx, I’ll check that.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [July 15, 2026, 9:35pm UTC](https://forum.sovol3d.com/t/error-message-never-seen-before/10205/4 "2026-07-15T21:35:32Z")

</div>

In the end, the reason was very simple.  
The temperature inside the enclosure was far too high (I was printing ASA).  
I simply opened the enclosure and, after a few minutes, the message disappeared.