# Erron 111 sovol sv07

**URL:** <https://forum.sovol3d.com/t/erron-111-sovol-sv07/3412>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [September 4, 2023, 9:14am UTC](https://forum.sovol3d.com/t/erron-111-sovol-sv07/3412 "2023-09-04T09:14:02Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Panda2aa](https://avatars.discourse-cdn.com/v4/letter/p/7cd45c/32.png) [@Panda2aa](https://forum.sovol3d.com/u/Panda2aa)\
**Post date:** [September 4, 2023, 9:14am UTC](https://forum.sovol3d.com/t/erron-111-sovol-sv07/3412/1 "2023-09-04T09:14:02Z")

</div>

![20230903_112945](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/1/1ca7ca2dfbf730c84fcca6d6c37f87494aaaa6fb.jpeg)  
will not connect to the klipper or moonraker anyone had this problem before and how do you fix it on fluidd getting a error time out putting in my flipper ip is there a rset button on the klipper itself and where is the firmware for the sovol S07 can’t find it anywhere