# endstop z. axis seems stuck in high value

**URL:** <https://forum.sovol3d.com/t/endstop-z-axis-seems-stuck-in-high-value/469>\
**Category:** Need Help\
**Created:** [July 27, 2022, 10:04am UTC](https://forum.sovol3d.com/t/endstop-z-axis-seems-stuck-in-high-value/469 "2022-07-27T10:04:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![sagueton.georges](https://avatars.discourse-cdn.com/v4/letter/s/c4cdca/32.png) [@sagueton.georges](https://forum.sovol3d.com/u/sagueton.georges)\
**Post date:** [July 27, 2022, 10:04am UTC](https://forum.sovol3d.com/t/endstop-z-axis-seems-stuck-in-high-value/469/1 "2022-07-27T10:04:45Z")

</div>

when I launch the auto home, it stops with the message STOPPED and the extruder stops about 2 cm from the bed.  
the z axis seems stuck in high value and it is impossible to make it go down to the level of the bed. the display shows endstop z.

---

<div class="post-metadata">

**Author:** ![Ciol](https://avatars.discourse-cdn.com/v4/letter/c/e274bd/32.png) [@Ciol](https://forum.sovol3d.com/u/Ciol)\
**Post date:** [July 28, 2022, 3:56am UTC](https://forum.sovol3d.com/t/endstop-z-axis-seems-stuck-in-high-value/469/2 "2022-07-28T03:56:30Z")

</div>

Hi Georges

Which printer are you using?