# Enable HOST\_ACTION\_COMMANDS **URL:** \ **Category:** Firmware\ **Created:** [January 20, 2023, 2:35pm UTC](https://forum.sovol3d.com/t/enable-host-action-commands/1365 "2023-01-20T14:35:18Z")\ **Posts on this page:** 8\ **Page:** 1
**Author:** ![Giulio](https://avatars.discourse-cdn.com/v4/letter/g/45deac/32.png) [@Giulio](https://forum.sovol3d.com/u/Giulio)\ **Post date:** [January 20, 2023, 2:35pm UTC](https://forum.sovol3d.com/t/enable-host-action-commands/1365/1 "2023-01-20T14:35:18Z")
Please enable HOST\_ACTION\_COMMANDS on firmware, allowing OctoPrint to be aware of printer commands. ---
**Author:** ![sovol3d](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/sovol3d/32/9_2.png) [@sovol3d](https://forum.sovol3d.com/u/sovol3d)\ **Post date:** [January 20, 2023, 3:24pm UTC](https://forum.sovol3d.com/t/enable-host-action-commands/1365/2 "2023-01-20T15:24:24Z")
hi @Giulio Your advice is well received and will be forwarded to the software engineers. Besides, feel free to share more of your voice. Any constructive advice is appreciated! ---
**Author:** ![sovol3d](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/sovol3d/32/9_2.png) [@sovol3d](https://forum.sovol3d.com/u/sovol3d)\ **Post date:** [February 23, 2023, 3:36am UTC](https://forum.sovol3d.com/t/enable-host-action-commands/1365/3 "2023-02-23T03:36:46Z")
Hi @Giulio The HOST\_ACTION\_COMMANDS is currently enabled to allow OctoPrint to read the printer commands. Should you have any other questions, feel free to @“sovol3d”. 🤗 ---
**Author:** ![Danabw](https://avatars.discourse-cdn.com/v4/letter/d/22d042/32.png) [@Danabw](https://forum.sovol3d.com/u/Danabw)\ **Post date:** [February 23, 2023, 6:19am UTC](https://forum.sovol3d.com/t/enable-host-action-commands/1365/4 "2023-02-23T06:19:01Z")
Host action commands are not enabled in the SVO5 official firmware as far as I could tell, @sovol3d. To use octoprint with my SV05 I had to update and build the SV05 firmware. Are you talking about a different Sovol printer? I think there is an official release for the SV06 that has them enabled. In another topic I requested that host action commands in SV05 be enabled in a future release. ---
**Author:** ![Giulio](https://avatars.discourse-cdn.com/v4/letter/g/45deac/32.png) [@Giulio](https://forum.sovol3d.com/u/Giulio)\ **Post date:** [February 23, 2023, 3:45pm UTC](https://forum.sovol3d.com/t/enable-host-action-commands/1365/5 "2023-02-23T15:45:10Z")
Hi @sovol3d the HOST\_ACTION\_COMMANDS is not enabled at SV04. My request was to enabled it on SV04. ---
**Author:** ![Giulio](https://avatars.discourse-cdn.com/v4/letter/g/45deac/32.png) [@Giulio](https://forum.sovol3d.com/u/Giulio)\ **Post date:** [March 16, 2023, 1:29pm UTC](https://forum.sovol3d.com/t/enable-host-action-commands/1365/6 "2023-03-16T13:29:06Z")
Hi @sovol3d, do you have any planning to upgrade SV04 firmware to the new version of Marlin (2.1)? And remove the blocks on firmware for several features needed on daily basis. ---
**Author:** ![sovol3d](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/sovol3d/32/9_2.png) [@sovol3d](https://forum.sovol3d.com/u/sovol3d)\ **Post date:** [March 18, 2023, 4:23am UTC](https://forum.sovol3d.com/t/enable-host-action-commands/1365/7 "2023-03-18T04:23:01Z")
Hello, Sorry, currently not. Best regard, Jan ---
**Author:** ![NanoAntenna](https://avatars.discourse-cdn.com/v4/letter/n/71c47a/32.png) [@NanoAntenna](https://forum.sovol3d.com/u/NanoAntenna)\ **Post date:** [May 19, 2023, 5:32pm UTC](https://forum.sovol3d.com/t/enable-host-action-commands/1365/8 "2023-05-19T17:32:08Z")
@sovol3d , Are HOST\_ACTION\_COMMANDS enabled for the SV06 PLUS, and if not, when will they become available. INterested in full Octoprint functionality. Thank you !