# Empty extruder connector

**URL:** <https://forum.sovol3d.com/t/empty-extruder-connector/3604>\
**Category:** Sovol SV06 Plus\
**Created:** [October 3, 2023, 3:36pm UTC](https://forum.sovol3d.com/t/empty-extruder-connector/3604 "2023-10-03T15:36:21Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![vpv69](https://avatars.discourse-cdn.com/v4/letter/v/c37758/32.png) [@vpv69](https://forum.sovol3d.com/u/vpv69)\
**Post date:** [October 3, 2023, 3:36pm UTC](https://forum.sovol3d.com/t/empty-extruder-connector/3604/1 "2023-10-03T15:36:21Z")

</div>

Hello!  
I bought a new Sovol SV06+ printer.  
So far everything is working.  
I noticed that there is a connector on the extruder where nothing is plugged in. What is this connector for?

 ![2023-10-03_18-33](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/8/8400d227588af423a0513493d1ea2ab48aadaa3a.jpeg)

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [October 4, 2023, 12:42pm UTC](https://forum.sovol3d.com/t/empty-extruder-connector/3604/2 "2023-10-04T12:42:03Z")

</div>

The Plus uses the same extruder as the SV06, basically it goes to where the filament sensor is plugged into the board. It is an option that was never used.