# Eddy going too much down

**URL:** <https://forum.sovol3d.com/t/eddy-going-too-much-down/10231>\
**Category:** Sovol SV08\
**Created:** [July 29, 2026, 4:30pm UTC](https://forum.sovol3d.com/t/eddy-going-too-much-down/10231 "2026-07-29T16:30:18Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![petarpero](https://avatars.discourse-cdn.com/v4/letter/p/ce7236/32.png) [@petarpero](https://forum.sovol3d.com/u/petarpero)\
**Post date:** [July 29, 2026, 4:30pm UTC](https://forum.sovol3d.com/t/eddy-going-too-much-down/10231/1 "2026-07-29T16:30:18Z")

</div>

I retried calibration more times, and everytime on eddy calibrate it bends the extruder and the motors have to lift up fastly to not damage itself. Sometimes the error is: “ZoffsetCalibration: Toolhead probe more than ten times.”. I tried to follow the SV08 Max troubleshooting steps and decided to level the A and B. That didn’t work.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [July 29, 2026, 4:54pm UTC](https://forum.sovol3d.com/t/eddy-going-too-much-down/10231/2 "2026-07-29T16:54:56Z")

</div>

Hello,  
Please send an email to [info@sovol3d.com](mailto:info@sovol3d.com), including your order number and a description of the issue.  
They will respond with a fix or even send you replacement parts.  
Bye

---

<div class="post-metadata">

**Author:** ![petarpero](https://avatars.discourse-cdn.com/v4/letter/p/ce7236/32.png) [@petarpero](https://forum.sovol3d.com/u/petarpero)\
**Post date:** [July 29, 2026, 5:03pm UTC](https://forum.sovol3d.com/t/eddy-going-too-much-down/10231/3 "2026-07-29T17:03:32Z")

</div>

Sorry for not mentioning that the belt holder broke and it does the eddy Calibrate but the extruder always is too low and the emergency features kick in lifting the motor in time.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [July 29, 2026, 5:10pm UTC](https://forum.sovol3d.com/t/eddy-going-too-much-down/10231/4 "2026-07-29T17:10:27Z")

</div>

Ask to sovol, they’ll send you the broken part.