# Disable aux filiment feeder?

**URL:** <https://forum.sovol3d.com/t/disable-aux-filiment-feeder/9297>\
**Category:** Sovol SV08 MAX\
**Created:** [December 27, 2025, 1:26am UTC](https://forum.sovol3d.com/t/disable-aux-filiment-feeder/9297 "2025-12-27T01:26:04Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![cardoc](https://avatars.discourse-cdn.com/v4/letter/c/ec9cab/32.png) [@cardoc](https://forum.sovol3d.com/u/cardoc)\
**Post date:** [December 27, 2025, 3:13am UTC](https://forum.sovol3d.com/t/disable-aux-filiment-feeder/9297/2 "2025-12-27T03:13:51Z")

</div>

Please read through this thread. If you don’t find what you need then ask again.

> [@Filament buffer custom macros](https://forum.sovol3d.com/t/filament-buffer-custom-macros/8808/23):
>
> You need replace all default code from buffer, and take into account that you need to have good tensioner or filament will slip.

> [@External feeder assist replacement](https://forum.sovol3d.com/t/external-feeder-assist-replacement/8713/4):
>
> If you’d searched you’d have found this.

> [@Does anyone else's aux feeder sound like crap?](https://forum.sovol3d.com/t/does-anyone-elses-aux-feeder-sound-like-crap/8785/5):
>
> Mine sounds terrible, too. It’s extremely loud.

> [@Filament feeder failures](https://forum.sovol3d.com/t/filament-feeder-failures/8708/43):
>
> Actually, your wrong about that.. 1: Bambu doesn’t use Capricorn tubing. 2: Capricorn tubing isn’t wider, it’s smaller (tighter) then regular PTFE. No, I’m not wrong about that. Check the Capricorn tubing I linked to, it has a larger inside diameter of 3.0mm that works beautifully for the Sovol SV08 Max. I am aware that Bambu doesn’t ship with Capricorn tubing, Capricorn designed this for the Bambu AMS as an upgrade. It’s in a kit along with a cutter for people to replace the tubing in the …

---

_[View the full topic](https://forum.sovol3d.com/t/disable-aux-filiment-feeder/9297)._