# Default tempurature

**URL:** <https://forum.sovol3d.com/t/default-tempurature/3061>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [July 9, 2023, 10:21pm UTC](https://forum.sovol3d.com/t/default-tempurature/3061 "2023-07-09T22:21:54Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Markbrookes](https://avatars.discourse-cdn.com/v4/letter/m/b77776/32.png) [@Markbrookes](https://forum.sovol3d.com/u/Markbrookes)\
**Post date:** [July 9, 2023, 10:21pm UTC](https://forum.sovol3d.com/t/default-tempurature/3061/1 "2023-07-09T22:21:54Z")

</div>

My sovol sv06 defaults to 175 degrees I would like to change it to 210? can u help me? when i change it in settings b4 i slice it still says 175… Mark

---

<div class="post-metadata">

**Author:** ![Ac7ss](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/ac7ss/32/930_2.png) [@Ac7ss](https://forum.sovol3d.com/u/Ac7ss)\
**Post date:** [July 10, 2023, 3:43am UTC](https://forum.sovol3d.com/t/default-tempurature/3061/2 "2023-07-10T03:43:15Z")

</div>

You make the change in the slicer.  
Prusaslicer: filament settings

 ![Screenshot 2023-07-09 20.39.04](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/c/c0292789c11db27624901c78748109723780a5f2.png)  
Cura: material settings  
 ![Screenshot 2023-07-09 20.41.52](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/c/cf7d112c241d6a09a369bea12918e6b1e738e247.png)

Or manually change the  
M109 S175  
line to  
M109 S210  
within the g-code. (Not recimmended)