# Dead printer **URL:** \ **Category:** Sovol Klipperized SV07\ **Created:** [September 2, 2024, 6:51pm UTC](https://forum.sovol3d.com/t/dead-printer/5612 "2024-09-02T18:51:54Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![mlittle](https://avatars.discourse-cdn.com/v4/letter/m/c4cdca/32.png) [@mlittle](https://forum.sovol3d.com/u/mlittle)\ **Post date:** [September 2, 2024, 6:51pm UTC](https://forum.sovol3d.com/t/dead-printer/5612/1 "2024-09-02T18:51:54Z")
My printer is just two weeks old. Yesterday, during a print the machine just powered off. I had to turn off the power, remove the cord and plug it back in. Started it back up, printed for a few minutes and shut down again. Now, I have to leave it powered off for about 30 minutes before I can get it to turn back on. As soon as I start printing, the machine just shuts off. It seems as through a fuse if blowing in the power supply. I have to unplug power and wait about 30 minutes before it will turn back on. Any suggestions? It’s literally two weeks old. ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [September 2, 2024, 7:39pm UTC](https://forum.sovol3d.com/t/dead-printer/5612/2 "2024-09-02T19:39:55Z")
Hi, Have you contacted Sovol to use the warranty of your printer ? ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [September 2, 2024, 9:19pm UTC](https://forum.sovol3d.com/t/dead-printer/5612/3 "2024-09-02T21:19:53Z")
Sounds like it’s overheating, could be a fan on the board or power supply. Contact Sovol: [info@sovol3d.com](mailto:info@sovol3d.com) ---
**Author:** ![mlittle](https://avatars.discourse-cdn.com/v4/letter/m/c4cdca/32.png) [@mlittle](https://forum.sovol3d.com/u/mlittle)\ **Post date:** [September 2, 2024, 9:54pm UTC](https://forum.sovol3d.com/t/dead-printer/5612/4 "2024-09-02T21:54:12Z")
Yeah, that’s what I’m thinking too. ---
**Author:** ![sovol3d](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/sovol3d/32/9_2.png) [@sovol3d](https://forum.sovol3d.com/u/sovol3d)\ **Post date:** [September 4, 2024, 2:41am UTC](https://forum.sovol3d.com/t/dead-printer/5612/5 "2024-09-04T02:41:41Z")
Thank you so much for buying from Sovol, and I apologize for all the inconvenience. You can send an email to [info@sovol3d.com](mailto:info@sovol3d.com). Please enclose the above situation with videos and pictures and your order number, and we will check with the engineers asap. ---
**Author:** ![mlittle](https://avatars.discourse-cdn.com/v4/letter/m/c4cdca/32.png) [@mlittle](https://forum.sovol3d.com/u/mlittle)\ **Post date:** [September 4, 2024, 10:21am UTC](https://forum.sovol3d.com/t/dead-printer/5612/6 "2024-09-04T10:21:09Z")
I have emailed info and, to be honest, it’s been three days now without a resolution. More then 24 hrs without a response. I basically have a paper weight that I just bought. Needless to say, I am not at all happy. Your support department is severely lacking. I am buying another printer today from another manufacturer. FYI, I did send them the videos they asked for, they have my order number. ---
**Author:** ![mlittle](https://avatars.discourse-cdn.com/v4/letter/m/c4cdca/32.png) [@mlittle](https://forum.sovol3d.com/u/mlittle)\ **Post date:** [September 6, 2024, 10:47am UTC](https://forum.sovol3d.com/t/dead-printer/5612/7 "2024-09-06T10:47:48Z")
My problem turned out to be the power switch. I fixed it and have ordered a couple of backups. > **[Oiyagai 4pcs IEC320 C14 Inlet Module Connector Fuse Switch Male Power Socket w...](https://www.amazon.com/Oiyagai-IEC320-Module-Connector-Switch/dp/B07Z8ZPHD4)** > > Oiyagai 4pcs IEC320 C14 Inlet Module Connector Fuse Switch Male Power Socket w Switch AC 250V 10A (Red): Amazon.com: Tools & Home Improvement ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [September 6, 2024, 1:08pm UTC](https://forum.sovol3d.com/t/dead-printer/5612/8 "2024-09-06T13:08:37Z")
> [@mlittle](#): > > My problem turned out to be the power switch. I fixed it and have ordered a couple of backups. I almost posted that, but your cut off after running awhile. My SV06, first stop clicking when switch on/off. Then about a month later I saw sparks when I shut it off. ---
**Author:** ![mlittle](https://avatars.discourse-cdn.com/v4/letter/m/c4cdca/32.png) [@mlittle](https://forum.sovol3d.com/u/mlittle)\ **Post date:** [September 6, 2024, 2:32pm UTC](https://forum.sovol3d.com/t/dead-printer/5612/9 "2024-09-06T14:32:07Z")
Yeah I saw your post on another thread.