# Cura v.5.x Feed Speed Issue

**URL:** <https://forum.sovol3d.com/t/cura-v-5-x-feed-speed-issue/1979>\
**Category:** Sovol SV04 IDEX\
**Created:** [March 17, 2023, 2:24am UTC](https://forum.sovol3d.com/t/cura-v-5-x-feed-speed-issue/1979 "2023-03-17T02:24:38Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![urbnsr](https://avatars.discourse-cdn.com/v4/letter/u/df788c/32.png) [@urbnsr](https://forum.sovol3d.com/u/urbnsr)\
**Post date:** [March 17, 2023, 2:24am UTC](https://forum.sovol3d.com/t/cura-v-5-x-feed-speed-issue/1979/1 "2023-03-17T02:24:38Z")

</div>

I’m trying to understand Cura’s speed output for the SV04. With an Ender3 printer, when I set Cura’s Print Speed to 60mm/s, I mostly see an output of 900 (i.e. G1 F900 X140.191 Y141.26 E0.0291)

With the SV04, when I set Cura’s Print Speed to 60mm/s, the same area of output is much faster like: G1 F2400 X140.191 Y141.26 E0.0291. It prints too fast.

What controls the speed conversion and what should that value be in order to print at 60mm/s?

Thanks,

---

<div class="post-metadata">

**Author:** ![urbnsr](https://avatars.discourse-cdn.com/v4/letter/u/df788c/32.png) [@urbnsr](https://forum.sovol3d.com/u/urbnsr)\
**Post date:** [March 19, 2023, 10:50am UTC](https://forum.sovol3d.com/t/cura-v-5-x-feed-speed-issue/1979/2 "2023-03-19T10:50:24Z")

</div>

I didn’t figure out the answer, but completely reset Cura which seems to have taken care of speed problem.