# CURA upgrade Issues

**URL:** <https://forum.sovol3d.com/t/cura-upgrade-issues/100>\
**Category:** Slicer Questions\
**Created:** [September 6, 2021, 5:59pm UTC](https://forum.sovol3d.com/t/cura-upgrade-issues/100 "2021-09-06T17:59:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![reildeal](https://avatars.discourse-cdn.com/v4/letter/r/77aa72/32.png) [@reildeal](https://forum.sovol3d.com/u/reildeal)\
**Post date:** [September 6, 2021, 5:59pm UTC](https://forum.sovol3d.com/t/cura-upgrade-issues/100/1 "2021-09-06T17:59:03Z")

</div>

Hello All, just downloaded the latest CURA software for Sovol 3D with touchscreen upgrade. Since the upgrade cannot print. Have adjusted the machine settings, though latest version does show Sovol 3D in printer list. Have unistalled and re-installed old version but still no luck. Printer starts, moves home, homes Z then homes X,Y, then repeats 2X’s then stops. Display says is printing but machine is not moving. BL does go from red with a small blue light to all red after the last Z home move. HELP!! probably something stupid that I am missing.

---

<div class="post-metadata">

**Author:** ![sovol3d](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/sovol3d/32/9_2.png) [@sovol3d](https://forum.sovol3d.com/u/sovol3d)\
**Post date:** [April 15, 2022, 3:43am UTC](https://forum.sovol3d.com/t/cura-upgrade-issues/100/2 "2022-04-15T03:43:01Z")

</div>

Hi, Reildeal  
Could you please let me know which 3D printer you have?