# Cura settings for preloaded benchy **URL:** \ **Category:** Sovol SV06 Plus\ **Created:** [April 22, 2023, 10:03pm UTC](https://forum.sovol3d.com/t/cura-settings-for-preloaded-benchy/2393 "2023-04-22T22:03:16Z")\ **Posts on this page:** 1\ **Showing post:** 3
**Author:** ![Lurker](https://avatars.discourse-cdn.com/v4/letter/l/dfb087/32.png) [@Lurker](https://forum.sovol3d.com/u/Lurker)\ **Post date:** [April 24, 2023, 2:57pm UTC](https://forum.sovol3d.com/t/cura-settings-for-preloaded-benchy/2393/3 "2023-04-24T14:57:36Z")
My problem is solved. I had an issue with the sovol version of cura where the z axis wasn’t moving enough, I’m not sure if I messed with the wrong setting or if it came that way but loading someone else’s profile did not fix it and I had to switch over to the main version of cura and then imported someone’s profile as a starting point. It is possible to get one of these machines out of the box and running your own files in under an hour. I on the other hand took the time before it was together to lube the bearings which I am happy with. There are some profiles floating around [\> here](https://forum.sovol3d.com/t/2257/6) and elsewhere if you look hard enough. There is a [discord](https://top.gg/servers/788873913953157131/join) that may actually have paid support available. Honestly there’s too many platforms these days, I like decentralization for some things but not for this. --- _[View the full topic](https://forum.sovol3d.com/t/cura-settings-for-preloaded-benchy/2393)._