# Cura 5.4.0 SV06 Profile Fix to Use Default Material Print Temperature

**URL:** <https://forum.sovol3d.com/t/cura-5-4-0-sv06-profile-fix-to-use-default-material-print-temperature/3256>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Tags:** slicer\
**Created:** [August 11, 2023, 2:22pm UTC](https://forum.sovol3d.com/t/cura-5-4-0-sv06-profile-fix-to-use-default-material-print-temperature/3256 "2023-08-11T14:22:11Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ebrog](https://avatars.discourse-cdn.com/v4/letter/e/a587f6/32.png) [@Ebrog](https://forum.sovol3d.com/u/Ebrog)\
**Post date:** [August 11, 2023, 2:22pm UTC](https://forum.sovol3d.com/t/cura-5-4-0-sv06-profile-fix-to-use-default-material-print-temperature/3256/1 "2023-08-11T14:22:11Z")

</div>

My print temperatures were not being updated from 195° when different materials were selected. Looks like Cura 5.4.0 has a bug in its SV06 profile. Here’s instructions to fix:

> <https://github.com/Ultimaker/Cura/issues/16100#issuecomment-1631210292>
>
> \### Cura Version
> 
> 5.4.0
> 
> \### Operating System
> 
> MacOS Ventura
> 
> \### Printer
> 
> Sovol… SV06 Plus
> 
> \### Reproduction steps
> 
> Did a complete fresh installation on my Mac and found out, that the predefined Material Temperatures are not used within Cura. Cura always uses the 195°C no matter which material I selected.
> Used the new SV06 Plus profile, but tested it with the old profile, same behavior.
> Didnt had any issued in previous Cura versions on my Mac.
> 
> I sliced a model just to see, if the print temp in background are correct, only the view in Cura wrong, but that wasn't the case, the 195° are finale in the G-Code.
> 
> Looks like there is an overriding problem of the "basic" 195° print temp, because the bed temp is changing when I select a different material, only print temp will stay at 195°.
> 
> !\[Bildschirmfoto 2023-07-10 um 22 55 17\](https://github.com/Ultimaker/Cura/assets/78445703/54e1489c-7cd2-4a6d-9b5f-e026bf03026c)
> !\[Bildschirmfoto 2023-07-10 um 22 59 47\](https://github.com/Ultimaker/Cura/assets/78445703/78d6d5d4-4c8f-4f5e-932b-77659d1273a0)
> 
> 
> \### Actual results
> 
> Screenshots from UI attached, Print Temps from different material is not imported at all
> 
> \### Expected results
> 
> Print Temps changing with selecting a Material
> 
> \### Add your .zip and screenshots here ⬇️
> 
> \[Printtemps.3mf.zip\](https://github.com/Ultimaker/Cura/files/12008562/Printtemps.3mf.zip)

---

<div class="post-metadata">

**Author:** ![OldFatMan](https://avatars.discourse-cdn.com/v4/letter/o/85f322/32.png) [@OldFatMan](https://forum.sovol3d.com/u/OldFatMan)\
**Post date:** [September 8, 2023, 2:25pm UTC](https://forum.sovol3d.com/t/cura-5-4-0-sv06-profile-fix-to-use-default-material-print-temperature/3256/2 "2023-09-08T14:25:03Z")

</div>

Thanks for that- did you have any luck saving the file? I get a message that I don"t have permission to save it after I update it. I tried running as admin and I get the same message.

---

<div class="post-metadata">

**Author:** ![Ebrog](https://avatars.discourse-cdn.com/v4/letter/e/a587f6/32.png) [@Ebrog](https://forum.sovol3d.com/u/Ebrog)\
**Post date:** [September 16, 2023, 2:08pm UTC](https://forum.sovol3d.com/t/cura-5-4-0-sv06-profile-fix-to-use-default-material-print-temperature/3256/3 "2023-09-16T14:08:28Z")

</div>

I didn’t have any problems saving it. Maybe restart the computer and edit/save the file first thing before running Cura.