# Considering Klipper screen

**URL:** <https://forum.sovol3d.com/t/considering-klipper-screen/4158>\
**Category:** Sovol SV06 Plus\
**Created:** [December 27, 2023, 2:06am UTC](https://forum.sovol3d.com/t/considering-klipper-screen/4158 "2023-12-27T02:06:46Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![zenabi\_uematsu](https://avatars.discourse-cdn.com/v4/letter/z/e9c0ed/32.png) [@zenabi\_uematsu](https://forum.sovol3d.com/u/zenabi_uematsu)\
**Post date:** [December 27, 2023, 2:06am UTC](https://forum.sovol3d.com/t/considering-klipper-screen/4158/1 "2023-12-27T02:06:46Z")

</div>

So I’ve had my SV06 Plus since about the time they came out. It’s always been a hit or miss printer for me. sometimes I get some pretty good stuff out of it and other times I get issues.  
Just wondering if anybody has an opinion as to whether getting the klipper screen upgrade for this printer drastically improves reliability.

---

<div class="post-metadata">

**Author:** ![Mindless](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mindless/32/1196_2.png) [@Mindless](https://forum.sovol3d.com/u/Mindless)\
**Post date:** [December 28, 2023, 4:14am UTC](https://forum.sovol3d.com/t/considering-klipper-screen/4158/2 "2023-12-28T04:14:42Z")

</div>

First off, Try a better Slicer if you haven’t yet,

OrcaSlicer-

Go here and Scroll to the bottom of page and download  
OrcaSlicer\_Windows\_Installer\_1.8.1 exe

> **[Release OrcaSlicer V1.8.1 Official Release · SoftFever/OrcaSlicer](https://github.com/SoftFever/OrcaSlicer/releases/tag/v1.8.1)**
>
> UPDATE:
> Apple users: the build is not signed and notarized properly due to a CICD issue.
> New notarized build will be reuploaded soon.
> New builds have been uploaded
> 
> This is the official release of ...

1- During the install process select the “SV06+ Profile” when ask-

2- Just keep Filament Selection the same

3- You don’t need “Bambu Network Plugin” so un-check that part… that way you don’t need an Account either (you can always change this later on)

That’s it you should be good to go-

Orca Slicer- is a just far better slicer at the moment… it produces extremely good prints even on crappy filaments- And the Profiles are ready to print, just double check the Nozzle temperature (195degs/200deg) and Bed temperature (40deg Gluestick / to 60degs) and that’s it, the printing speed is set slower other slicers but just leave this for while and enjoy some nice prints-

One thing to check is the “Overhang Speed” increase it to- 25mm/sec- it was set way to slow last time i installed it not sure if they fix it yet-.

Anyway just killing some time, All the Best

here’s a link to a test object, one of best all rounders-.

> **[ADE Calibration Object by ade2](https://www.thingiverse.com/thing:3954131)**
>
> This is a small 30x30mm multi-testing calibration object. Print it to test your printer's mechanics and configuration.
> This object is designed for 0.4mm nozzles but will work on others too. Let me know if you'd like a specific variant in the...

> **[OrcaSlicer- An Introduction and How to Get Started | Obico Knowledge Base](https://www.obico.io/blog/orcaslicer/)**
>
> Introduction

---

<div class="post-metadata">

**Author:** ![spannmagoo](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/spannmagoo/32/1006_2.png) [@spannmagoo](https://forum.sovol3d.com/u/spannmagoo)\
**Post date:** [January 1, 2024, 9:31pm UTC](https://forum.sovol3d.com/t/considering-klipper-screen/4158/3 "2024-01-01T21:31:00Z")

</div>

The screen is awesome and Klipper makes this printer so much better.