# Can't get the probe z offset to work on sv06

**URL:** <https://forum.sovol3d.com/t/cant-get-the-probe-z-offset-to-work-on-sv06/848>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [November 21, 2022, 7:48pm UTC](https://forum.sovol3d.com/t/cant-get-the-probe-z-offset-to-work-on-sv06/848 "2022-11-21T19:48:41Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![sovol3delger](https://avatars.discourse-cdn.com/v4/letter/s/4bbf92/32.png) [@sovol3delger](https://forum.sovol3d.com/u/sovol3delger)\
**Post date:** [November 21, 2022, 7:55pm UTC](https://forum.sovol3d.com/t/cant-get-the-probe-z-offset-to-work-on-sv06/848/2 "2022-11-21T19:55:52Z")

</div>

Hi,

Did you actually manage to get yours to bed level as mine wont:

> [@SV06 wont bed level](https://forum.sovol3d.com/t/sv06-wont-bed-level/846):
>
> When I click the bed level it moves to position 1 then stops. The sensor does not drop down. What am I doing wrong? Also my offset is about -7.11 is that right?!? Thanks

I’m starting to worry about this. It looks like a nice bit of kit, easy to put together but I’m having troubles with the first step. Plus my offset was -7.11 which I thought was way too much…

Thanks

Oh, the knob on the base is the belt tensioner if I think you are looking at the same one as me but without a picture it’s rather difficult to tell.

---

_[View the full topic](https://forum.sovol3d.com/t/cant-get-the-probe-z-offset-to-work-on-sv06/848)._