# Can't get the probe z offset to work on sv06

**URL:** <https://forum.sovol3d.com/t/cant-get-the-probe-z-offset-to-work-on-sv06/848>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [November 21, 2022, 7:48pm UTC](https://forum.sovol3d.com/t/cant-get-the-probe-z-offset-to-work-on-sv06/848 "2022-11-21T19:48:41Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![Jonz75](https://avatars.discourse-cdn.com/v4/letter/j/85e7bf/32.png) [@Jonz75](https://forum.sovol3d.com/u/Jonz75)\
**Post date:** [December 4, 2022, 9:33pm UTC](https://forum.sovol3d.com/t/cant-get-the-probe-z-offset-to-work-on-sv06/848/11 "2022-12-04T21:33:32Z")

</div>

Did anyone find a solution for this? My sv06 out of the box does absolutely nothing when i cluck on the z offset. The numbers on the screen change. However the head does not move up and down. I have to fake the numbers in configurations to get it even close. Yes i scratched the bed. Made me super happy on brand new machine

---

_[View the full topic](https://forum.sovol3d.com/t/cant-get-the-probe-z-offset-to-work-on-sv06/848)._