# Can you change the filament (PLA) mid print on SV06

**URL:** <https://forum.sovol3d.com/t/can-you-change-the-filament-pla-mid-print-on-sv06/3931>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Tags:** filament\
**Created:** [November 20, 2023, 1:56pm UTC](https://forum.sovol3d.com/t/can-you-change-the-filament-pla-mid-print-on-sv06/3931 "2023-11-20T13:56:03Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tesskoh](https://avatars.discourse-cdn.com/v4/letter/t/b3f665/32.png) [@Tesskoh](https://forum.sovol3d.com/u/Tesskoh)\
**Post date:** [November 20, 2023, 1:56pm UTC](https://forum.sovol3d.com/t/can-you-change-the-filament-pla-mid-print-on-sv06/3931/1 "2023-11-20T13:56:03Z")

</div>

[![Sovol3d forum](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/1X/c8366f7d43f008332e7c6dcb896aad6deac01a21.jpeg)](https://forum.sovol3d.com/)

# [Changing filament mid print?](https://forum.sovol3d.com/t/changing-filament-mid-print/3930)

[General Chatting](https://forum.sovol3d.com/c/general-chatting/18)

- ![profile, messages, bookmarks and preferences](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/1/128ca22f9288883f485e661cfa1ca32e98ead38a.png "Gary")

Do you want live notifications when people reply to your posts? Enable Notifications​

# [Changing filament mid print?](https://forum.sovol3d.com/t/changing-filament-mid-print/3930)

[General Chatting](https://forum.sovol3d.com/c/general-chatting/18)

[![](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/1/128ca22f9288883f485e661cfa1ca32e98ead38a.png)](https://forum.sovol3d.com/u/Tesskoh)

[Tesskoh](https://forum.sovol3d.com/u/Tesskoh)

[1m](https://forum.sovol3d.com/t/changing-filament-mid-print/3930)

Hi,

I’m currently printing out a model but it looks like i’ll run out of filament (PLA) before the end. Is it possible to pause and change the filament on the SV06…sorry if an easy Q…i’m still quite new to 3d printing.

Thanks

---

<div class="post-metadata">

**Author:** ![Daily123](https://avatars.discourse-cdn.com/v4/letter/d/9fc348/32.png) [@Daily123](https://forum.sovol3d.com/u/Daily123)\
**Post date:** [November 26, 2023, 6:52pm UTC](https://forum.sovol3d.com/t/can-you-change-the-filament-pla-mid-print-on-sv06/3931/2 "2023-11-26T18:52:03Z")

</div>

Yes just pause take out fillement and put new one in it purges then press continue