# Built new version for 300 deg ut still just 260 deg **URL:** \ **Category:** Sovol SV04 IDEX\ **Created:** [October 26, 2022, 5:23pm UTC](https://forum.sovol3d.com/t/built-new-version-for-300-deg-ut-still-just-260-deg/722 "2022-10-26T17:23:43Z")\ **Posts on this page:** 1\ **Showing post:** 7
**Author:** ![Pukin\_Dog](https://avatars.discourse-cdn.com/v4/letter/p/97f17d/32.png) [@Pukin\_Dog](https://forum.sovol3d.com/u/Pukin_Dog)\ **Post date:** [November 13, 2022, 1:01am UTC](https://forum.sovol3d.com/t/built-new-version-for-300-deg-ut-still-just-260-deg/722/7 "2022-11-13T01:01:41Z")
Hi. The settings in Marlin is no problem. I was stuck with the darn screen. I don’t know what to make undone to match the original so I guess that using that tool to get read the fw that is there is the way to go here. I didn’t know that was possible. I do have an Octopus main board and a new screen ordered to do it myself so if it goes south I do have the same rout I intended to take as an option. Thanks for this info, it will be fun… Or not… Sincerely Yours Johan Sweden --- _[View the full topic](https://forum.sovol3d.com/t/built-new-version-for-300-deg-ut-still-just-260-deg/722)._