# Build starts well but then turns to spaghetti

**URL:** <https://forum.sovol3d.com/t/build-starts-well-but-then-turns-to-spaghetti/4871>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [April 14, 2024, 3:04am UTC](https://forum.sovol3d.com/t/build-starts-well-but-then-turns-to-spaghetti/4871 "2024-04-14T03:04:30Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![T\_Dog](https://avatars.discourse-cdn.com/v4/letter/t/2bfe46/32.png) [@T\_Dog](https://forum.sovol3d.com/u/T_Dog)\
**Post date:** [April 14, 2024, 3:04am UTC](https://forum.sovol3d.com/t/build-starts-well-but-then-turns-to-spaghetti/4871/1 "2024-04-14T03:04:31Z")

</div>

4 months down the track after getting my solvol sv06 I have still yet to complete a build. Fiddling and changing parameters. The build starts ok but soon the filament no longer sticks to the build and I get spaghetti.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [April 14, 2024, 12:20pm UTC](https://forum.sovol3d.com/t/build-starts-well-but-then-turns-to-spaghetti/4871/2 "2024-04-14T12:20:17Z")

</div>

Hello,  
You should post the settings of your slicer.

- Z-offset too high
- Tempertures
- Speed print
- Retraction
- Speed fan  
…
