# Benchy in 12m 59s

**URL:** <https://forum.sovol3d.com/t/benchy-in-12m-59s/6466>\
**Category:** Sovol SV06 ACE\
**Created:** [January 4, 2025, 1:01pm UTC](https://forum.sovol3d.com/t/benchy-in-12m-59s/6466 "2025-01-04T13:01:31Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![DanC](https://avatars.discourse-cdn.com/v4/letter/d/77aa72/32.png) [@DanC](https://forum.sovol3d.com/u/DanC)\
**Post date:** [January 4, 2025, 1:01pm UTC](https://forum.sovol3d.com/t/benchy-in-12m-59s/6466/1 "2025-01-04T13:01:31Z")

</div>

Does anyone have the Orca settings used to produce the 12m 59s benchy?

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [January 4, 2025, 1:38pm UTC](https://forum.sovol3d.com/t/benchy-in-12m-59s/6466/2 "2025-01-04T13:38:41Z")

</div>

Hello,  
Have you seen that there are 2 models of benchy ?  
One of 13mn, the other one about 30mn.  
I’ve printed the first one with the Orcaslicer default settings and it takes 13mn.

---

<div class="post-metadata">

**Author:** ![DanC](https://avatars.discourse-cdn.com/v4/letter/d/77aa72/32.png) [@DanC](https://forum.sovol3d.com/u/DanC)\
**Post date:** [January 4, 2025, 3:09pm UTC](https://forum.sovol3d.com/t/benchy-in-12m-59s/6466/3 "2025-01-04T15:09:39Z")

</div>

Thanks, missed that I’ll take a look