# Bed thermistor problem

**URL:** <https://forum.sovol3d.com/t/bed-thermistor-problem/2186>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [April 8, 2023, 3:52pm UTC](https://forum.sovol3d.com/t/bed-thermistor-problem/2186 "2023-04-08T15:52:28Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Fawell](https://avatars.discourse-cdn.com/v4/letter/f/77aa72/32.png) [@Fawell](https://forum.sovol3d.com/u/Fawell)\
**Post date:** [April 8, 2023, 3:52pm UTC](https://forum.sovol3d.com/t/bed-thermistor-problem/2186/1 "2023-04-08T15:52:28Z")

</div>

I have a problem with my SV06, it seems to me that the cable from the thermistor is damaged, because when I press on the section that was fastened with a cable tie, the temperature reading suddenly returns. What should I do?

 ![IMG_0519](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/1X/1f7d42f3227fdc50c67c92769e60d4309bc262e7.jpeg)

---

<div class="post-metadata">

**Author:** ![Fawell](https://avatars.discourse-cdn.com/v4/letter/f/77aa72/32.png) [@Fawell](https://forum.sovol3d.com/u/Fawell)\
**Post date:** [April 8, 2023, 3:56pm UTC](https://forum.sovol3d.com/t/bed-thermistor-problem/2186/2 "2023-04-08T15:56:11Z")

</div>

I checked everything as it is written on the website, changed the thermistor connection on the motherboard and still have no readings

---

<div class="post-metadata">

**Author:** ![Corne-1981](https://avatars.discourse-cdn.com/v4/letter/c/f0a364/32.png) [@Corne-1981](https://forum.sovol3d.com/u/Corne-1981)\
**Post date:** [April 8, 2023, 5:07pm UTC](https://forum.sovol3d.com/t/bed-thermistor-problem/2186/3 "2023-04-08T17:07:21Z")

</div>

My SV06 bed is Dead to

 ![afbeelding](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/1X/e9901976c213c0181cd7e77f4b08f6cf115487d4.jpeg)