# Auxiliary feeder issue

**URL:** https://forum.sovol3d.com/t/auxiliary-feeder-issue/9677
**Category:** Sovol SV08 MAX
**Created:** [March 1, 2026, 8:07am UTC](https://forum.sovol3d.com/t/auxiliary-feeder-issue/9677 "2026-03-01T08:07:04Z")
**Posts on this page:** 1
**Showing post:** 5

<div class="post-metadata">

### Author: ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)
#### Post date: [March 1, 2026, 1:27pm UTC](https://forum.sovol3d.com/t/auxiliary-feeder-issue/9677/5 "2026-03-01T13:27:31Z")

</div>

Read through this thread:

> [@Filament feeder failures](https://forum.sovol3d.com/t/filament-feeder-failures/8708):
>
> Has anyone else experience failures with the filament feeder? After setting up the printer I printed a few test prints, but each time I printed something, the print would pause during the print with an error that the filament feeder detected a clog. I checked. There was no clog. I just resumed printing and it started printing again. Another 10 minutes or so went by and the same thing happened. Then it happened again and again. I disassembled the filament feeder, but everything looked like…

---

_[View the full topic](https://forum.sovol3d.com/t/auxiliary-feeder-issue/9677)._