# Autohome not working **URL:** \ **Category:** Sovol SV04 IDEX\ **Created:** [August 19, 2022, 11:14pm UTC](https://forum.sovol3d.com/t/autohome-not-working/524 "2022-08-19T23:14:58Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![3pendrgn](https://avatars.discourse-cdn.com/v4/letter/3/5f9b8f/32.png) [@3pendrgn](https://forum.sovol3d.com/u/3pendrgn)\ **Post date:** [August 19, 2022, 11:14pm UTC](https://forum.sovol3d.com/t/autohome-not-working/524/1 "2022-08-19T23:14:58Z")
I just finished cleaning my nozels filement tube and now the auto home dosent work. I can typically just turn the printer on and off again to reset it but now nomatter how many times i turn it off and back on the extruder by the right extruder keeps clanking against the right most side and sometimes and i get an error popup. ---
**Author:** ![Sofans](https://avatars.discourse-cdn.com/v4/letter/s/a88e4f/32.png) [@Sofans](https://forum.sovol3d.com/u/Sofans)\ **Post date:** [September 22, 2022, 9:11am UTC](https://forum.sovol3d.com/t/autohome-not-working/524/2 "2022-09-22T09:11:58Z")
It may be that the thread is loose or damaged when cleaning the nozzle. Try something following. - Can the probe retract back and forth twice normally when it is just turned on? Re-plug the probe end of the 3d-touch, and the wiring between the adapter board end and the main board end to ensure that they are firmly inserted and not damaged. - Check if the machine screw on the top of the 3d-touch is tightened? - Swap the adapter board and the adapter cable respectively, and then test the leveling again. -You can try to flash the firmware again, firmware + tutorial: [SV04 V1.1.0 (24th Jan 2022) - Google Drive](https://drive.google.com/drive/folders/18Ugs2Fy7O4XB1yW2JUYcJNZ--4C6ZdQE) Post back test video if it doesn’t work. ---
**Author:** ![rolan](https://avatars.discourse-cdn.com/v4/letter/r/c0e974/32.png) [@rolan](https://forum.sovol3d.com/u/rolan)\ **Post date:** [October 7, 2022, 4:34pm UTC](https://forum.sovol3d.com/t/autohome-not-working/524/3 "2022-10-07T16:34:56Z")
good day, i have similar problem by the auto home , its push bed down, then brobe retrakt. i have 1.1.0 and display 2.0