# Anybody know the spec for the SV06 Plus for Conversion to Sonic Pad **URL:** \ **Category:** Sovol SV06 Plus\ **Created:** [November 22, 2024, 6:23pm UTC](https://forum.sovol3d.com/t/anybody-know-the-spec-for-the-sv06-plus-for-conversion-to-sonic-pad/6066 "2024-11-22T18:23:19Z")\ **Posts on this page:** 7\ **Page:** 1
**Author:** ![beemergb](https://avatars.discourse-cdn.com/v4/letter/b/8e8cbc/32.png) [@beemergb](https://forum.sovol3d.com/u/beemergb)\ **Post date:** [November 22, 2024, 6:23pm UTC](https://forum.sovol3d.com/t/anybody-know-the-spec-for-the-sv06-plus-for-conversion-to-sonic-pad/6066/1 "2024-11-22T18:23:19Z")
Im looking for the id of the mainboard,etc and what to put in on my Creality Sonic Pad ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [November 22, 2024, 6:58pm UTC](https://forum.sovol3d.com/t/anybody-know-the-spec-for-the-sv06-plus-for-conversion-to-sonic-pad/6066/2 "2024-11-22T18:58:03Z")
Hi, Did you search the wiki ? [https://wiki.sovol3d.com/en/SV06PLUS](https://wiki.sovol3d.com/en/SV06PLUS) ---
**Author:** ![beemergb](https://avatars.discourse-cdn.com/v4/letter/b/8e8cbc/32.png) [@beemergb](https://forum.sovol3d.com/u/beemergb)\ **Post date:** [November 23, 2024, 8:20am UTC](https://forum.sovol3d.com/t/anybody-know-the-spec-for-the-sv06-plus-for-conversion-to-sonic-pad/6066/3 "2024-11-23T08:20:39Z")
Hi Mich , Yes I did and found nothing ! I took the cover off that holds the maiford and tried to see the id on the chip but theres nothing on it ! Have you any idea what it could be ? I will also ask on the forum and contact Sovol as well. Thank you again Have a great weekend Harry ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [November 23, 2024, 8:25am UTC](https://forum.sovol3d.com/t/anybody-know-the-spec-for-the-sv06-plus-for-conversion-to-sonic-pad/6066/4 "2024-11-23T08:25:41Z")
If you contacted Sovol at [info@sovol3d.com](mailto:info@sovol3d.com) you will get an answer in a few days. Have a nice weekend too. ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [November 23, 2024, 12:44pm UTC](https://forum.sovol3d.com/t/anybody-know-the-spec-for-the-sv06-plus-for-conversion-to-sonic-pad/6066/5 "2024-11-23T12:44:47Z")
Try this: [![](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/b/b94146af5912139170f97bc30019f9c73800a040.jpeg "SV06 Plus sonic pad configuration!") ](https://www.youtube.com/watch?v=PL2bLVbEhmY) ---
**Author:** ![beemergb](https://avatars.discourse-cdn.com/v4/letter/b/8e8cbc/32.png) [@beemergb](https://forum.sovol3d.com/u/beemergb)\ **Post date:** [November 23, 2024, 2:52pm UTC](https://forum.sovol3d.com/t/anybody-know-the-spec-for-the-sv06-plus-for-conversion-to-sonic-pad/6066/6 "2024-11-23T14:52:04Z")
Will do thanks .And after a brainstorm ,I thought why not down load the original Firmware and get on printing with your Simplify 3D slicer and get some printing done ! And bingo I was right at last !! Happy Days Harry ---
**Author:** ![beemergb](https://avatars.discourse-cdn.com/v4/letter/b/8e8cbc/32.png) [@beemergb](https://forum.sovol3d.com/u/beemergb)\ **Post date:** [November 23, 2024, 2:57pm UTC](https://forum.sovol3d.com/t/anybody-know-the-spec-for-the-sv06-plus-for-conversion-to-sonic-pad/6066/7 "2024-11-23T14:57:30Z")
Yes Ive tried this and it didnt work for me , his expalnation is a bit sketchy .I contacted him over this and got no reply