# Any slicer with simple selection for SV06 PLUS? **URL:** \ **Category:** Sovol SV06 Plus\ **Tags:** slicer\ **Created:** [July 16, 2023, 9:32pm UTC](https://forum.sovol3d.com/t/any-slicer-with-simple-selection-for-sv06-plus/3095 "2023-07-16T21:32:42Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![Johnsosd](https://avatars.discourse-cdn.com/v4/letter/j/c89c15/32.png) [@Johnsosd](https://forum.sovol3d.com/u/Johnsosd)\ **Post date:** [July 16, 2023, 9:32pm UTC](https://forum.sovol3d.com/t/any-slicer-with-simple-selection-for-sv06-plus/3095/1 "2023-07-16T21:32:42Z")
New here to 3d printing. I’m probably oversimplifying, but Is there any slicer with a simple selection for SV06 Plus? ---
**Author:** ![Manfredo52](https://avatars.discourse-cdn.com/v4/letter/m/cdc98d/32.png) [@Manfredo52](https://forum.sovol3d.com/u/Manfredo52)\ **Post date:** [July 17, 2023, 5:40am UTC](https://forum.sovol3d.com/t/any-slicer-with-simple-selection-for-sv06-plus/3095/2 "2023-07-17T05:40:49Z")
Sovol does offer an old Cura Version (this webpage somehwere), but the new CURA version does have the 6+ included as well. ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [July 17, 2023, 7:35am UTC](https://forum.sovol3d.com/t/any-slicer-with-simple-selection-for-sv06-plus/3095/3 "2023-07-17T07:35:33Z")
Have you tried to export the SV06+ profile from the Sovol Cura and reimport this profile in the new release of Cura ? ---
**Author:** ![ijaaz](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/ijaaz/32/816_2.png) [@ijaaz](https://forum.sovol3d.com/u/ijaaz)\ **Post date:** [July 19, 2023, 2:55pm UTC](https://forum.sovol3d.com/t/any-slicer-with-simple-selection-for-sv06-plus/3095/4 "2023-07-19T14:55:54Z")
I was using the sovol version of cura for the longest time. Was frustrating and buggy, but I didn’t have to play with setings, etc. The latest version of Cura has support for the SV06+ and works well. ---
**Author:** ![jailsonsouto](https://avatars.discourse-cdn.com/v4/letter/j/a6a055/32.png) [@jailsonsouto](https://forum.sovol3d.com/u/jailsonsouto)\ **Post date:** [July 20, 2023, 8:21pm UTC](https://forum.sovol3d.com/t/any-slicer-with-simple-selection-for-sv06-plus/3095/5 "2023-07-20T20:21:42Z")
I´m using Cura 5.4. Need some little adjustments, but it’s ok. ---
**Author:** ![ijaaz](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/ijaaz/32/816_2.png) [@ijaaz](https://forum.sovol3d.com/u/ijaaz)\ **Post date:** [July 21, 2023, 1:17pm UTC](https://forum.sovol3d.com/t/any-slicer-with-simple-selection-for-sv06-plus/3095/6 "2023-07-21T13:17:53Z")
What did you have to change? I haven’t done a thing and it’s printing well ---
**Author:** ![jailsonsouto](https://avatars.discourse-cdn.com/v4/letter/j/a6a055/32.png) [@jailsonsouto](https://forum.sovol3d.com/u/jailsonsouto)\ **Post date:** [July 21, 2023, 3:24pm UTC](https://forum.sovol3d.com/t/any-slicer-with-simple-selection-for-sv06-plus/3095/7 "2023-07-21T15:24:33Z")
Temp and Retraction towers to print petg. i have blobs with default settings suggested in sovol guide. I remove water for filament before print. isn’t humidity. ---
**Author:** ![Adar](https://avatars.discourse-cdn.com/v4/letter/a/58f4c7/32.png) [@Adar](https://forum.sovol3d.com/u/Adar)\ **Post date:** [July 27, 2023, 3:59pm UTC](https://forum.sovol3d.com/t/any-slicer-with-simple-selection-for-sv06-plus/3095/8 "2023-07-27T15:59:11Z")
I have been using Orca Slicer it has been working great. Only has profile for .4 mm nozzle, but that has worked very well for me. ---
**Author:** ![wrusman](https://avatars.discourse-cdn.com/v4/letter/w/8dc957/32.png) [@wrusman](https://forum.sovol3d.com/u/wrusman)\ **Post date:** [September 6, 2024, 6:30am UTC](https://forum.sovol3d.com/t/any-slicer-with-simple-selection-for-sv06-plus/3095/9 "2024-09-06T06:30:20Z")
Prusaslicer includes several Sovol models as well, they seem to work fine on the sv06 plus