# Adhesion **URL:** \ **Category:** Sovol SV06 Plus\ **Tags:** advice\ **Created:** [November 2, 2024, 10:20pm UTC](https://forum.sovol3d.com/t/adhesion/5914 "2024-11-02T22:20:46Z")\ **Posts on this page:** 15\ **Page:** 1
**Author:** ![Wwizzard63](https://avatars.discourse-cdn.com/v4/letter/w/8e7dd6/32.png) [@Wwizzard63](https://forum.sovol3d.com/u/Wwizzard63)\ **Post date:** [November 2, 2024, 10:20pm UTC](https://forum.sovol3d.com/t/adhesion/5914/1 "2024-11-02T22:20:46Z")
![20241102_221512](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/5/5e9750214be632fc9c5e4dfd33b6fd605e3be99e.jpeg) ![20241102_221522](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/2X/d/d095d42ded3506c6bc93bc49eed7f6d3737e39da.jpeg) Been printing on this machine all week with no problems. Then last night, it decided that the print wouldnt stick to the bed. Took the PEI sheet off, thoroughly washed it with dish soap, did a Z Align, set the Z offset, and then did an auto bed level. Still the prints aren’t fully sticking to the PEI sheet. ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [November 2, 2024, 11:59pm UTC](https://forum.sovol3d.com/t/adhesion/5914/2 "2024-11-02T23:59:51Z")
You really need to scrub sometimes, you really need something that will dug in a little. These work well, I pick them up at the grocery store. > **[Amazon.com: 3 Set- Scour Daddy 3ct : Health & Household](https://www.amazon.com/3-Set-Scour-Daddy-3ct/dp/B0B64KQMQP)** > > One 3-Count Pack ArmorTec Mesh Scouring Pad. Mesh 18% stronger; FlexTexture Core 32% thicker; 65% stronger and absorbs 64% more water than the leading competitor. Ideal for use all around the home - Kitchen; Bathroom; Outdoor and a multitude of other... ---
**Author:** ![Wwizzard63](https://avatars.discourse-cdn.com/v4/letter/w/8e7dd6/32.png) [@Wwizzard63](https://forum.sovol3d.com/u/Wwizzard63)\ **Post date:** [November 3, 2024, 3:34am UTC](https://forum.sovol3d.com/t/adhesion/5914/3 "2024-11-03T03:34:14Z")
Thank you. I think this could well be the solution. Changed the z offset, made it slightly smaller. The brim seemed much better, but the print failed in the same place again. Just been on Amazon coincidentally (0330 here - cant sleep…). And found those scourers on the UK site. May order later plus need to find my isopropyl alcohol I’ve put somewhere lol I’ll try and get back to sleep and look into ordering those and finding the IPA when i get up. ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [November 3, 2024, 8:57am UTC](https://forum.sovol3d.com/t/adhesion/5914/4 "2024-11-03T08:57:52Z")
I hope you were able to sleep. Printing isn’t so important. 🥴 ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [November 3, 2024, 11:51am UTC](https://forum.sovol3d.com/t/adhesion/5914/5 "2024-11-03T11:51:35Z")
For new users it is…I remember those days 😆 ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [November 3, 2024, 12:01pm UTC](https://forum.sovol3d.com/t/adhesion/5914/6 "2024-11-03T12:01:14Z")
I agree with that 😴😴 ---
**Author:** ![Wwizzard63](https://avatars.discourse-cdn.com/v4/letter/w/8e7dd6/32.png) [@Wwizzard63](https://forum.sovol3d.com/u/Wwizzard63)\ **Post date:** [November 3, 2024, 10:20pm UTC](https://forum.sovol3d.com/t/adhesion/5914/7 "2024-11-03T22:20:32Z")
I’ve forgotten what proper sleep is lol I’m awaiting a hip replacement and sometimes the pain keeps me up. Hopefully it will be done in next two months 🤞 ---
**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\ **Post date:** [November 3, 2024, 10:23pm UTC](https://forum.sovol3d.com/t/adhesion/5914/8 "2024-11-03T22:23:48Z")
Good luck and get well soon ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [November 4, 2024, 12:40am UTC](https://forum.sovol3d.com/t/adhesion/5914/9 "2024-11-04T00:40:25Z")
> [@Wwizzard63](#): > > I’m awaiting a hip replacement and sometimes the pain keeps me up. Hopefully it will be done in next two months I get my 1st of 3 gel shots in my knees in the morning…what fun it is getting old. ---
**Author:** ![Wwizzard63](https://avatars.discourse-cdn.com/v4/letter/w/8e7dd6/32.png) [@Wwizzard63](https://forum.sovol3d.com/u/Wwizzard63)\ **Post date:** [November 4, 2024, 1:09am UTC](https://forum.sovol3d.com/t/adhesion/5914/10 "2024-11-04T01:09:17Z")
I’ve had cortisone injections in my right knee for OA. Didn’t do much tbh. ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [November 4, 2024, 1:41am UTC](https://forum.sovol3d.com/t/adhesion/5914/11 "2024-11-04T01:41:21Z")
Cortisone doesn’t work on me. If the gel doesn’t work the only other option is replacement. Anyway…back to the thread topic. ---
**Author:** ![Sqdengr](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/sqdengr/32/956_2.png) [@Sqdengr](https://forum.sovol3d.com/u/Sqdengr)\ **Post date:** [November 5, 2024, 5:52pm UTC](https://forum.sovol3d.com/t/adhesion/5914/12 "2024-11-05T17:52:24Z")
Side note: few months back had a noisy fan on SX06. Your recommendation using a Can of Air and it worked great. Thanks again. ---
**Author:** ![Wwizzard63](https://avatars.discourse-cdn.com/v4/letter/w/8e7dd6/32.png) [@Wwizzard63](https://forum.sovol3d.com/u/Wwizzard63)\ **Post date:** [November 6, 2024, 3:48am UTC](https://forum.sovol3d.com/t/adhesion/5914/13 "2024-11-06T03:48:20Z")
The scour daddy and some IPA worked brilliantly ---
**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\ **Post date:** [November 6, 2024, 11:46am UTC](https://forum.sovol3d.com/t/adhesion/5914/14 "2024-11-06T11:46:51Z")
Try soap & water with pad, dry plate, then wipe down with IPA. ---
**Author:** ![system](https://canada1.discourse-cdn.com/flex030/uploads/sovolforum/original/1X/c8366f7d43f008332e7c6dcb896aad6deac01a21.jpeg) [@system](https://forum.sovol3d.com/u/system)\ **Post date:** [November 7, 2024, 10:00pm UTC](https://forum.sovol3d.com/t/adhesion/5914/15 "2024-11-07T22:00:53Z")
This topic was automatically closed 30 hours after the last reply. New replies are no longer allowed.