# Ability To Disable Auto Bed Leveling With SV04?

**URL:** <https://forum.sovol3d.com/t/ability-to-disable-auto-bed-leveling-with-sv04/1291>\
**Category:** Sovol SV04 IDEX\
**Created:** [January 12, 2023, 4:13pm UTC](https://forum.sovol3d.com/t/ability-to-disable-auto-bed-leveling-with-sv04/1291 "2023-01-12T16:13:21Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Bjoern](https://avatars.discourse-cdn.com/v4/letter/b/46a35a/32.png) [@Bjoern](https://forum.sovol3d.com/u/Bjoern)\
**Post date:** [January 12, 2023, 6:41pm UTC](https://forum.sovol3d.com/t/ability-to-disable-auto-bed-leveling-with-sv04/1291/2 "2023-01-12T18:41:45Z")

</div>

Yes - you could disable all touch-sensor based bed leveling features in Marlin firmware & bring it on your SV04. However, it seems to make much more sense to get your touch sensor running.  
You might want to run some touch sensor tests as decribed here: [https://www.3dprintbeast.com/bltouch-self-test/](https://www.3dprintbeast.com/bltouch-self-test/)  
You’ll need a tool like Pronterface (Freeware) to initiate the mentioned G-Code test commands via USB connection from your computer.  
If the touch sensor is still not working you may want to try the trouble shooting instructions suggested in the following link [Caveat: I won’t recommend changing firmware before being absolutely sure that there is no mechanical or electrical/wiring problem present]: [https://3dprinterly.com/how-to-fix-auto-leveling-sensors-not-working-bltouch-more/](https://3dprinterly.com/how-to-fix-auto-leveling-sensors-not-working-bltouch-more/)

---

_[View the full topic](https://forum.sovol3d.com/t/ability-to-disable-auto-bed-leveling-with-sv04/1291)._