# 3D Printer Filament Spool Holder for SV06

**URL:** <https://forum.sovol3d.com/t/3d-printer-filament-spool-holder-for-sv06/10082>\
**Category:** Sovol SV06 Fully Open Source 3D Printer\
**Created:** [June 5, 2026, 6:10pm UTC](https://forum.sovol3d.com/t/3d-printer-filament-spool-holder-for-sv06/10082 "2026-06-05T18:10:07Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![abonosky](https://avatars.discourse-cdn.com/v4/letter/a/90db22/32.png) [@abonosky](https://forum.sovol3d.com/u/abonosky)\
**Post date:** [June 5, 2026, 6:10pm UTC](https://forum.sovol3d.com/t/3d-printer-filament-spool-holder-for-sv06/10082/1 "2026-06-05T18:10:07Z")

</div>

Hi,

I bought the filament spool holder that’s listed under accessories for the SV06 (this page → [Sovol FDM 3D Printer Accessories](https://www.sovol3d.com/collections/fdm-parts/For-Sovol-SV06)). However, now that I have it - it does not seem to be compatible. Is there a way to get this to work with the SV06?

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [June 5, 2026, 6:15pm UTC](https://forum.sovol3d.com/t/3d-printer-filament-spool-holder-for-sv06/10082/2 "2026-06-05T18:15:34Z")

</div>

Hello,  
Please send an email to [info@sovol3d.com](mailto:info@sovol3d.com) and include your order number.  
If there is an error, they will send you the correct item or issue a refund.  
Cheers

---

<div class="post-metadata">

**Author:** ![Lion](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/lion/32/5586_2.png) [@Lion](https://forum.sovol3d.com/u/Lion)\
**Post date:** [June 5, 2026, 8:15pm UTC](https://forum.sovol3d.com/t/3d-printer-filament-spool-holder-for-sv06/10082/3 "2026-06-05T20:15:39Z")

</div>

I’ve never seen that one before: [Sovol 3D Printer Filament Spool Holder](https://www.sovol3d.com/products/3d-printer-filament-spool-holder)  
That is more of an aftermarket mod, so it rides the spool & does not use the center hole.

---

<div class="post-metadata">

**Author:** ![mich0111](https://yyz2.discourse-cdn.com/flex030/user_avatar/forum.sovol3d.com/mich0111/32/1176_2.png) [@mich0111](https://forum.sovol3d.com/u/mich0111)\
**Post date:** [June 6, 2026, 9:48am UTC](https://forum.sovol3d.com/t/3d-printer-filament-spool-holder-for-sv06/10082/4 "2026-06-06T09:48:21Z")

</div>

You can be sure that with such an holder, if the filament get tangled, the whole printer could fall to the floor.