# Comgrow T500 **URL:** https://forum.sovol3d.com/c/t500/55.md [Latest](https://forum.sovol3d.com/latest.md) · [Categories](https://forum.sovol3d.com/categories.md) · [Tags](https://forum.sovol3d.com/tags.md) --- ## [About the Comgrow T500 category](https://forum.sovol3d.com/t/about-the-comgrow-t500-category/5930)
**Author:** [@sovol3d](https://forum.sovol3d.com/u/sovol3d)\ **Replies:** 0\ **Last updated:** [November 5, 2024, 7:28am UTC](https://forum.sovol3d.com/t/about-the-comgrow-t500-category/5930 "2024-11-05T07:28:48Z")
Everything related to Comgrow T500 --- ## [Coprint Chromahead and Comgrow T500](https://forum.sovol3d.com/t/coprint-chromahead-and-comgrow-t500/10343)
**Author:** [@R2026](https://forum.sovol3d.com/u/R2026)\ **Replies:** 2\ **Last updated:** [September 3, 2026, 2:33pm UTC](https://forum.sovol3d.com/t/coprint-chromahead-and-comgrow-t500/10343 "2026-09-03T14:33:03Z")
Greetings. Newbie here. Recently purchased a Comgrow T500 (before I saw the SV08 Max). Printer is working well (after a few days of fine tuning). I ordered a Co Print KCM Set | Multi-Color 3D Printing Upgrade Kit for Kl… --- ## [Firmware t500](https://forum.sovol3d.com/t/firmware-t500/6808)
**Author:** [@carbonal](https://forum.sovol3d.com/u/carbonal)\ **Replies:** 3\ **Last updated:** [July 15, 2026, 12:09pm UTC](https://forum.sovol3d.com/t/firmware-t500/6808 "2026-07-15T12:09:00Z")
Hi has anyone had problems upgrading the firmware on the T500 to the latest version. I have used the EMMC module as per the tutorial but have had problems getting the file from ETCHER to the flash unit , when I did the s… --- ## [Touchscreen won't load t500](https://forum.sovol3d.com/t/touchscreen-wont-load-t500/9876)
**Author:** [@Lam0279](https://forum.sovol3d.com/u/Lam0279)\ **Replies:** 2\ **Last updated:** [April 13, 2026, 4:21pm UTC](https://forum.sovol3d.com/t/touchscreen-wont-load-t500/9876 "2026-04-13T16:21:44Z")
Hello, I bought Comgrow T500 awhile ago and just got to install it today but the touchscreen stuck at loading said “Armbian-unofficial 24.2.0-trunk bookworn tty1 Mkspi login:” It replays this message every 5s or so. … --- ## [Sovol T500 - Comgrow T500](https://forum.sovol3d.com/t/sovol-t500-comgrow-t500/9693)
**Author:** [@Tomboysmission](https://forum.sovol3d.com/u/Tomboysmission)\ **Replies:** 2\ **Last updated:** [March 5, 2026, 1:16am UTC](https://forum.sovol3d.com/t/sovol-t500-comgrow-t500/9693 "2026-03-05T01:16:45Z")
Hi everyone, I am a total newbie to the wonderful world of 3D printing. I possibly foolishly bought a Comgrow T500 which was non functional. I have gradually worked through the existing wiring and established that my p… --- ## [How to change Ethernet address?](https://forum.sovol3d.com/t/how-to-change-ethernet-address/9500)
**Author:** [@Johnny3D](https://forum.sovol3d.com/u/Johnny3D)\ **Replies:** 4\ **Last updated:** [February 9, 2026, 5:15pm UTC](https://forum.sovol3d.com/t/how-to-change-ethernet-address/9500 "2026-02-09T17:15:26Z")
Loving our 2 T500’s, but have a requirement to use static IP on Ethernet. Is there a guide, or an awesome user here, that can show me where/how to do that? I keep coming up with how to do wifi, but I need Ethernet. Th… --- ## [Printer head keeps lowering during printing](https://forum.sovol3d.com/t/printer-head-keeps-lowering-during-printing/8754)
**Author:** [@TommyT](https://forum.sovol3d.com/u/TommyT)\ **Replies:** 4\ **Last updated:** [September 18, 2025, 2:53am UTC](https://forum.sovol3d.com/t/printer-head-keeps-lowering-during-printing/8754 "2025-09-18T02:53:17Z")
My T500 printer head keeps lowering during printing. I have to sit and baby sit it in order to print anything. I’ve tried about everything suggested on this and other sites I’ve seen. ??? Is the T500 just a lemon? I… --- ## [Print nozzle colliding with print after an 1/2 hour or so of printing](https://forum.sovol3d.com/t/print-nozzle-colliding-with-print-after-an-1-2-hour-or-so-of-printing/8342)
**Author:** [@toddbailey](https://forum.sovol3d.com/u/toddbailey)\ **Replies:** 3\ **Last updated:** [July 24, 2025, 7:38pm UTC](https://forum.sovol3d.com/t/print-nozzle-colliding-with-print-after-an-1-2-hour-or-so-of-printing/8342 "2025-07-24T19:38:02Z")
so I’m using comgrow t500 with a .06 nozzle, a initial height setting of .07 and a layer height of .3 mm. I’m using orca slicer v2.3.0 It doesn’t matter what filament type I use after 1/2 an hour to maybe an hour of pri… --- ## [Upgrades](https://forum.sovol3d.com/t/upgrades/7533)
**Author:** [@carbonal](https://forum.sovol3d.com/u/carbonal)\ **Replies:** 0\ **Last updated:** [April 15, 2025, 4:49pm UTC](https://forum.sovol3d.com/t/upgrades/7533 "2025-04-15T16:49:52Z")
Hi Has anyone made an upgraded heater bed for theT500, and does anyone sell premade upgrade parts Allan --- ## [Layer shifts](https://forum.sovol3d.com/t/layer-shifts/6328)
**Author:** [@wparr2](https://forum.sovol3d.com/u/wparr2)\ **Replies:** 16\ **Last updated:** [December 23, 2024, 8:21pm UTC](https://forum.sovol3d.com/t/layer-shifts/6328 "2024-12-23T20:21:27Z")
I am experiencing X layer shifts when attempting to print large objects. (if I print moderate objects there is no problem) I am using Orca slicer, with PETG filament, bed temp=80degC, extruder temp=255degC To give a l… --- ## [Black screen](https://forum.sovol3d.com/t/black-screen/6266)
**Author:** [@GreyHorseLTD](https://forum.sovol3d.com/u/GreyHorseLTD)\ **Replies:** 5\ **Last updated:** [December 16, 2024, 12:23pm UTC](https://forum.sovol3d.com/t/black-screen/6266 "2024-12-16T12:23:50Z")
Hello! Received a printer, we assembled the printer, turned it on and after Comgrow logo black screnn, we tried many times and nothing. Do not know what to do… --- ## [How can I tell what firmware version I am on?](https://forum.sovol3d.com/t/how-can-i-tell-what-firmware-version-i-am-on/6139)
**Author:** [@twiddledup](https://forum.sovol3d.com/u/twiddledup)\ **Replies:** 3\ **Last updated:** [December 1, 2024, 8:23pm UTC](https://forum.sovol3d.com/t/how-can-i-tell-what-firmware-version-i-am-on/6139 "2024-12-01T20:23:01Z")
Are we still not supposed to be upgrading the firmware via the Klipper interface? (where it says newer versions are available). Only upgrade with the stuff released by Sovol? I was looking a the firmware update page. T… --- ## [Extruder woes-continual jamming/clogging](https://forum.sovol3d.com/t/extruder-woes-continual-jamming-clogging/5858)
**Author:** [@toddbailey](https://forum.sovol3d.com/u/toddbailey)\ **Replies:** 7\ **Last updated:** [November 12, 2024, 5:33pm UTC](https://forum.sovol3d.com/t/extruder-woes-continual-jamming-clogging/5858 "2024-11-12T17:33:59Z")
hi all my t500 extruder is continually jamming. It’s not a quick and easy fix either. I have to completely disassemble the extruder and separate the sprinkler head and heat sink then bake in the oven to soften the clog… --- ## [T500 won't z-calibrate](https://forum.sovol3d.com/t/t500-wont-z-calibrate/5006)
**Author:** [@exbmxer](https://forum.sovol3d.com/u/exbmxer)\ **Replies:** 17\ **Last updated:** [November 4, 2024, 8:46pm UTC](https://forum.sovol3d.com/t/t500-wont-z-calibrate/5006 "2024-11-04T20:46:45Z")
My Comgrow T500 won’t z-calibrate. It’s purchased it only a few months ago. I changed the print nozzle to a 0.6mm and then re-started the printer up and now the printer pushes the extruder into the bed and has to be canc… --- ## [Calibration fails after reflash extruder replacement](https://forum.sovol3d.com/t/calibration-fails-after-reflash-extruder-replacement/5786)
**Author:** [@toddbailey](https://forum.sovol3d.com/u/toddbailey)\ **Replies:** 2\ **Last updated:** [October 24, 2024, 1:38am UTC](https://forum.sovol3d.com/t/calibration-fails-after-reflash-extruder-replacement/5786 "2024-10-24T01:38:30Z")
HI, I had to flash the emmc device and reload firmware. After doing so I am unable to perform a Z Calib. The system tries to drive nozzle into bed and makes loud noise in the process. This is also a new extruder that… --- ## [Very first print stuck to the plate, no way to get it off without damage](https://forum.sovol3d.com/t/very-first-print-stuck-to-the-plate-no-way-to-get-it-off-without-damage/4516)
**Author:** [@dmitris](https://forum.sovol3d.com/u/dmitris)\ **Replies:** 3\ **Last updated:** [April 9, 2024, 12:06am UTC](https://forum.sovol3d.com/t/very-first-print-stuck-to-the-plate-no-way-to-get-it-off-without-damage/4516 "2024-04-09T00:06:11Z")
Just received my T500, calibrated it, printed the sample boat file and it came out allright. Went to print my own part, which is essentially a 3"x5" plate, roughtly 1/4 inch thick. For some reason it started printing in…