# Sovol SV06 Plus **URL:** https://forum.sovol3d.com/c/sovol-sv06-plus/52.md?page=1 [Latest](https://forum.sovol3d.com/latest.md) · [Categories](https://forum.sovol3d.com/categories.md) · [Tags](https://forum.sovol3d.com/tags.md) **Page:** 2 --- ## [Loud, fast clicking](https://forum.sovol3d.com/t/loud-fast-clicking/8478)
**Author:** [@TiemSaint](https://forum.sovol3d.com/u/TiemSaint)\ **Replies:** 3\ **Last updated:** [August 8, 2025, 10:24pm UTC](https://forum.sovol3d.com/t/loud-fast-clicking/8478 "2025-08-08T22:24:13Z")
After following instructions and watching a few videos, I put together my Sovol SV06 Ace Plus. On my first print, I encountered a very loud, fast clicking when the extruder moved across its mount. This has happened when … --- ## [Sovol SV06+ suddenly wants to do a filament change instead of printing](https://forum.sovol3d.com/t/sovol-sv06-suddenly-wants-to-do-a-filament-change-instead-of-printing/8289)
**Author:** [@Hans](https://forum.sovol3d.com/u/Hans)\ **Replies:** 3\ **Last updated:** [July 15, 2025, 7:55pm UTC](https://forum.sovol3d.com/t/sovol-sv06-suddenly-wants-to-do-a-filament-change-instead-of-printing/8289 "2025-07-15T19:55:04Z")
I replaced the original 0.4mm nozzle of my SV06+ with a 0.6mm hardened steel nozzle. After that I did an automatic pid tune. I have no idea if this is related to my problem. But ever since I replaced the nozzle, when I … --- ## [SV06 PLUS leaking from heat break (top)](https://forum.sovol3d.com/t/sv06-plus-leaking-from-heat-break-top/8122)
**Author:** [@ChaoticNeutral](https://forum.sovol3d.com/u/ChaoticNeutral)\ **Replies:** 15\ **Last updated:** [July 15, 2025, 4:36pm UTC](https://forum.sovol3d.com/t/sv06-plus-leaking-from-heat-break-top/8122 "2025-07-15T16:36:28Z")
My SV06 Plus is leaking filament from the top. I think its because the nozzle and the heat break aren’t mating enough. I cannot for the life of me get the heat break to thread in (since its smooth and theres no way to ti… --- ## [Nozzle jamming into bed after a few layers](https://forum.sovol3d.com/t/nozzle-jamming-into-bed-after-a-few-layers/8250)
**Author:** [@ChaoticNeutral](https://forum.sovol3d.com/u/ChaoticNeutral)\ **Replies:** 7\ **Last updated:** [July 15, 2025, 4:26pm UTC](https://forum.sovol3d.com/t/nozzle-jamming-into-bed-after-a-few-layers/8250 "2025-07-15T16:26:20Z")
Hi everyone, I’ve been running my SV06 Plus on Klipper for almost two years with no major issues other than a heat break leakage problem that is now fixed, but recently I started having a problem I can’t figure out. Th… --- ## [PLA Feeds fine when not printing, refuses to feed when printing](https://forum.sovol3d.com/t/pla-feeds-fine-when-not-printing-refuses-to-feed-when-printing/8252)
**Author:** [@SkidMarc25](https://forum.sovol3d.com/u/SkidMarc25)\ **Replies:** 2\ **Last updated:** [July 13, 2025, 3:24pm UTC](https://forum.sovol3d.com/t/pla-feeds-fine-when-not-printing-refuses-to-feed-when-printing/8252 "2025-07-13T15:24:38Z")
I’ve had my Sovol SV06+ for over a year and I’ve been relatively happy with it, but this new error I’m running into is stumping me. If I load PLA it will feed through properly during the load procedure. When I start up … --- ## [Printer or slicer troubleshooting](https://forum.sovol3d.com/t/printer-or-slicer-troubleshooting/8177)
**Author:** [@Chad](https://forum.sovol3d.com/u/Chad)\ **Replies:** 3\ **Last updated:** [July 5, 2025, 1:56pm UTC](https://forum.sovol3d.com/t/printer-or-slicer-troubleshooting/8177 "2025-07-05T13:56:55Z")
Without changing any settings, my printer will not print corners at a sharp 90\* angle, it has started to print corners with a large radius and finish is terrible. This is with new files. I tried previous files and it mak… --- ## [X crashes when homeing](https://forum.sovol3d.com/t/x-crashes-when-homeing/8166)
**Author:** [@beemergb](https://forum.sovol3d.com/u/beemergb)\ **Replies:** 6\ **Last updated:** [July 3, 2025, 9:19pm UTC](https://forum.sovol3d.com/t/x-crashes-when-homeing/8166 "2025-07-03T21:19:35Z")
My X is trying to home and all it does is crash into the left side and crashes and buzzis like crazy ! Any ideas whats up ? --- ## [What adjustments need to be made](https://forum.sovol3d.com/t/what-adjustments-need-to-be-made/8075)
**Author:** [@Chad](https://forum.sovol3d.com/u/Chad)\ **Replies:** 1\ **Last updated:** [June 18, 2025, 1:59am UTC](https://forum.sovol3d.com/t/what-adjustments-need-to-be-made/8075 "2025-06-18T01:59:40Z")
What causes the corners to look like this? It’s like there is too much extrusion but only on corners as they are not perfectly square, they kind of bow out from the side walls. Not a big deal for visual prints where I po… --- ## [SV06 Plus upgrades](https://forum.sovol3d.com/t/sv06-plus-upgrades/8060)
**Author:** [@Chad](https://forum.sovol3d.com/u/Chad)\ **Replies:** 1\ **Last updated:** [June 13, 2025, 4:04pm UTC](https://forum.sovol3d.com/t/sv06-plus-upgrades/8060 "2025-06-13T16:04:29Z")
I have a Sovol SV06 Plus. I have an enormous amount of printing time with all components stock. Prints have slowly been decreasing in quality I’m assuming due to wear. I would like to completely upgrade all bearings, ste… --- ## [Power switch starting to bug](https://forum.sovol3d.com/t/power-switch-starting-to-bug/2711)
**Author:** [@lomeas](https://forum.sovol3d.com/u/lomeas)\ **Replies:** 20\ **Last updated:** [June 12, 2025, 7:51pm UTC](https://forum.sovol3d.com/t/power-switch-starting-to-bug/2711 "2025-06-12T19:51:13Z")
hey i started having issue with my SV06 plus turning off rnadomly yesterday and today when i try to turn it on it just gets power for a few sec then turns back off. after some invertigations i found that keeping the swit… --- ## ['stepper\_z' must be between position\_](https://forum.sovol3d.com/t/stepper-z-must-be-between-position/7918)
**Author:** [@beemergb](https://forum.sovol3d.com/u/beemergb)\ **Replies:** 56\ **Last updated:** [June 11, 2025, 11:30am UTC](https://forum.sovol3d.com/t/stepper-z-must-be-between-position/7918 "2025-06-11T11:30:37Z")
position\_endstop in section ‘stepper\_z’ must be between position\_min and position\_max Once the underlying issue is corrected, use the “RESTART” command to reload the config and restart the host software. Printer is halte… --- ## [My SVO6 Plus Doesn't Want to Recognize the MicroSD Card](https://forum.sovol3d.com/t/my-svo6-plus-doesnt-want-to-recognize-the-microsd-card/7978)
**Author:** [@TwiceOnce](https://forum.sovol3d.com/u/TwiceOnce)\ **Replies:** 4\ **Last updated:** [June 3, 2025, 8:37pm UTC](https://forum.sovol3d.com/t/my-svo6-plus-doesnt-want-to-recognize-the-microsd-card/7978 "2025-06-03T20:37:26Z")
It didn’t want to recognize my SD Card after I turned off the printer. I had to force turn it off because (when I pressed stop) it wouldn’t go back home and I couldn’t press any buttons on the screen. I did format the ca… --- ## [Driver error on sv06 plus](https://forum.sovol3d.com/t/driver-error-on-sv06-plus/7845)
**Author:** [@Chad](https://forum.sovol3d.com/u/Chad)\ **Replies:** 2\ **Last updated:** [May 20, 2025, 8:22pm UTC](https://forum.sovol3d.com/t/driver-error-on-sv06-plus/7845 "2025-05-20T20:22:57Z")
I have a sv06 plus and after 1 year of no issues suddenly have a “driver error, printer halted please reset” code. the printer will start a print and then just quit printing. I have three printers, all the same model. I … --- ## [Using the USB port](https://forum.sovol3d.com/t/using-the-usb-port/2882)
**Author:** [@Guba](https://forum.sovol3d.com/u/Guba)\ **Replies:** 6\ **Last updated:** [May 11, 2025, 8:18pm UTC](https://forum.sovol3d.com/t/using-the-usb-port/2882 "2025-05-11T20:18:17Z")
Hello everyone, Can we use the USB port with a pendrive instead the MicroSD card for the printing? --- ## [SV06 Plus Midprint lockup](https://forum.sovol3d.com/t/sv06-plus-midprint-lockup/3120)
**Author:** [@Netruner](https://forum.sovol3d.com/u/Netruner)\ **Replies:** 38\ **Last updated:** [May 7, 2025, 10:47am UTC](https://forum.sovol3d.com/t/sv06-plus-midprint-lockup/3120 "2025-05-07T10:47:55Z")
Good day, all! Here is a puzzle for everyone! My 6+ has been doing an outstanding job - I set it up two weeks ago got it leveled and started printing. I have printed several different Calibration prints that have come … --- ## [Klipperized SV06+: significant Y axis shifting on a single layer](https://forum.sovol3d.com/t/klipperized-sv06-significant-y-axis-shifting-on-a-single-layer/6633)
**Author:** [@chesamo](https://forum.sovol3d.com/u/chesamo)\ **Replies:** 36\ **Last updated:** [May 7, 2025, 4:47am UTC](https://forum.sovol3d.com/t/klipperized-sv06-significant-y-axis-shifting-on-a-single-layer/6633 "2025-05-07T04:47:30Z")
I recently Klipperized my SV06+ and smaller prints haven’t been having an issue, it’s been great. However larger prints seem to have one-off Y-axis shifts in the same direction every so often: (this particular print … --- ## [Getting really frustrated with constant problems with my SV06's](https://forum.sovol3d.com/t/getting-really-frustrated-with-constant-problems-with-my-sv06s/7488)
**Author:** [@Pankonen](https://forum.sovol3d.com/u/Pankonen)\ **Replies:** 4\ **Last updated:** [April 13, 2025, 7:58pm UTC](https://forum.sovol3d.com/t/getting-really-frustrated-with-constant-problems-with-my-sv06s/7488 "2025-04-13T19:58:34Z")
Hello, My SV06 is giving me this issue now. I dont even know whats going on but feel like its a bed heat issue maybe? Thoughts? I’m not sure how to share the pictures? Here is a google drive link w two pics: sovol\_issue… --- ## [Octroprint Android not recognizing printer by OTG](https://forum.sovol3d.com/t/octroprint-android-not-recognizing-printer-by-otg/7749)
**Author:** [@Konsovol](https://forum.sovol3d.com/u/Konsovol)\ **Replies:** 2\ **Last updated:** [May 4, 2025, 6:20pm UTC](https://forum.sovol3d.com/t/octroprint-android-not-recognizing-printer-by-otg/7749 "2025-05-04T18:20:18Z")
Hi! I bought this printer about a week ago and I’m very happy, but now I’m tinkering a little with it and I can’t manage to connect the printer to Octoprint Android. I have used 2 different OTG cables and it still show … --- ## [AMS Prints, can I do?](https://forum.sovol3d.com/t/ams-prints-can-i-do/7680)
**Author:** [@TwiceOnce](https://forum.sovol3d.com/u/TwiceOnce)\ **Replies:** 3\ **Last updated:** [April 29, 2025, 11:15am UTC](https://forum.sovol3d.com/t/ams-prints-can-i-do/7680 "2025-04-29T11:15:54Z")
So there’s this print that I want to do, problem is all plates have AMS, so my question is if I can do the print and if so what will happen when the layer color changes? https://makerworld.com/en/models/91140-pistachio-… --- ## [Hotend Fan](https://forum.sovol3d.com/t/hotend-fan/3518)
**Author:** [@Haaky](https://forum.sovol3d.com/u/Haaky)\ **Replies:** 7\ **Last updated:** [April 19, 2025, 5:30pm UTC](https://forum.sovol3d.com/t/hotend-fan/3518 "2025-04-19T17:30:10Z")
I swapped out the parts cooling fan on my SV06 for a 5015 (Works Awesome) Next step was to swap out the 4010 hotend fan for a 5015 fan aswell. (Works Awesome aswell). Here is what i found interesting. I found when i re… --- ## [Klipper pinouts?](https://forum.sovol3d.com/t/klipper-pinouts/7259)
**Author:** [@chesamo](https://forum.sovol3d.com/u/chesamo)\ **Replies:** 3\ **Last updated:** [April 13, 2025, 1:57am UTC](https://forum.sovol3d.com/t/klipper-pinouts/7259 "2025-04-13T01:57:22Z")
I’m trying to install a CR Touch in place of the inductive probe using a mount from Printables. However, when I connect the CR Touch the device initialized correctly but I’m not able to run the command BLTOUCH\_DEBUG COMM… --- ## [First layer error](https://forum.sovol3d.com/t/first-layer-error/7485)
**Author:** [@Joost](https://forum.sovol3d.com/u/Joost)\ **Replies:** 2\ **Last updated:** [April 11, 2025, 12:14pm UTC](https://forum.sovol3d.com/t/first-layer-error/7485 "2025-04-11T12:14:00Z")
I have continuously the same error with the first layer. Even a new printing head does not help. Levelling does not help either. I use the cura software to slice. Any tips? --- ## [Klipperscreen dead](https://forum.sovol3d.com/t/klipperscreen-dead/7455)
**Author:** [@ryebread](https://forum.sovol3d.com/u/ryebread)\ **Replies:** 5\ **Last updated:** [April 8, 2025, 7:43pm UTC](https://forum.sovol3d.com/t/klipperscreen-dead/7455 "2025-04-08T19:43:01Z")
My Klipper screen recently went down, with the screen dead and only the green LED solidly lit. I cannot connect via wifi, SSH, etc. Things I have tried: Updating klipperscreen firmware via flash drive - nothing even st… --- ## [Any Marlin experts here? Trying to figure out how to make SD card auto-remount work](https://forum.sovol3d.com/t/any-marlin-experts-here-trying-to-figure-out-how-to-make-sd-card-auto-remount-work/7405)
**Author:** [@pulsar124](https://forum.sovol3d.com/u/pulsar124)\ **Replies:** 1\ **Last updated:** [April 3, 2025, 5:46pm UTC](https://forum.sovol3d.com/t/any-marlin-experts-here-trying-to-figure-out-how-to-make-sd-card-auto-remount-work/7405 "2025-04-03T17:46:39Z")
I have one remaining annoyance with this printer. I’m using an extension cable for my SD card, and that means every time I swap a card I need to power-cycle the printer. I am messing up with the source code (specificall… --- ## [KlipperScreen Firmware Flash Issue](https://forum.sovol3d.com/t/klipperscreen-firmware-flash-issue/7245)
**Author:** [@phenam79](https://forum.sovol3d.com/u/phenam79)\ **Replies:** 5\ **Last updated:** [April 2, 2025, 10:37pm UTC](https://forum.sovol3d.com/t/klipperscreen-firmware-flash-issue/7245 "2025-04-02T22:37:42Z")
Hi. I needed to reflash the firmware on my sovol klipper screen. I downloaded the firmware and instructions from the official sovol product page. Was able to reflash the screen successfully, however after it finished … --- ## [SV06 Plus Klipper boot screen stuck in a loop - Is Sovol trying to pull one over on me or is their product really that bad?](https://forum.sovol3d.com/t/sv06-plus-klipper-boot-screen-stuck-in-a-loop-is-sovol-trying-to-pull-one-over-on-me-or-is-their-product-really-that-bad/7322)
**Author:** [@Myob\_I\_Juan](https://forum.sovol3d.com/u/Myob_I_Juan)\ **Replies:** 2\ **Last updated:** [March 30, 2025, 11:04pm UTC](https://forum.sovol3d.com/t/sv06-plus-klipper-boot-screen-stuck-in-a-loop-is-sovol-trying-to-pull-one-over-on-me-or-is-their-product-really-that-bad/7322 "2025-03-30T23:04:18Z")
I, like many of you, have encountered the nightmare of the never-ending boot loop. After weeks of wrestling with this issue, I’ve been in daily communication with Sovol, and I’d like to share the “help” they’ve provided … --- ## [SV06 Plus SAVE\_VARIABLE Klipper error](https://forum.sovol3d.com/t/sv06-plus-save-variable-klipper-error/4245)
**Author:** [@EzraB](https://forum.sovol3d.com/u/EzraB)\ **Replies:** 2\ **Last updated:** [March 28, 2025, 8:32pm UTC](https://forum.sovol3d.com/t/sv06-plus-save-variable-klipper-error/4245 "2025-03-28T20:32:17Z")
I got my SV06 Plus running Klipper with the SOVOL Klipper screen. I’ve had it for about two weeks and after a few days every time I tried to start a print it would show this error: I have tried reinstalling the firmw… --- ## [M73 gcode works from the serial connection, ignored from SD card](https://forum.sovol3d.com/t/m73-gcode-works-from-the-serial-connection-ignored-from-sd-card/7337)
**Author:** [@pulsar124](https://forum.sovol3d.com/u/pulsar124)\ **Replies:** 2\ **Last updated:** [March 27, 2025, 3:23pm UTC](https://forum.sovol3d.com/t/m73-gcode-works-from-the-serial-connection-ignored-from-sd-card/7337 "2025-03-27T15:23:31Z")
I like my recently purchased Sovol sv06 Plus overall, but there is one major annoyance: I like to put G29 (25 point bed leveling) command inside my gcode file (to print from SD card), but when I use the original Sovol fi… --- ## [SV06 and cannot get the screen to work](https://forum.sovol3d.com/t/sv06-and-cannot-get-the-screen-to-work/7140)
**Author:** [@Henkinchin](https://forum.sovol3d.com/u/Henkinchin)\ **Replies:** 5\ **Last updated:** [March 26, 2025, 5:47pm UTC](https://forum.sovol3d.com/t/sv06-and-cannot-get-the-screen-to-work/7140 "2025-03-26T17:47:43Z")
I have just purchased an SV06 and cannot get the screen to work. I’ve checked and followed advice in here and from other places online and the only way I can get the screen to turn on is if I connect it to my laptop thro… --- ## [PLA filament kink at extruder](https://forum.sovol3d.com/t/pla-filament-kink-at-extruder/7288)
**Author:** [@Parz1val](https://forum.sovol3d.com/u/Parz1val)\ **Replies:** 1\ **Last updated:** [March 23, 2025, 11:13am UTC](https://forum.sovol3d.com/t/pla-filament-kink-at-extruder/7288 "2025-03-23T11:13:04Z")
Good evening y’all. I’ve been having an issue and I cannot seem to cure it yet and was hoping for some advice. I have two SV06+ printers, both running Klipper/mainsail and I and using Orca. I’ve been printing in PETG o… [Previous page](https://forum.sovol3d.com/c/sovol-sv06-plus/52.md) [Next page](https://forum.sovol3d.com/c/sovol-sv06-plus/52.md?page=2)