# Sovol SV01 Pro

**URL:** https://forum.sovol3d.com/c/sovol-sv01pro/31.md?page=1

[Latest](https://forum.sovol3d.com/latest.md) · [Categories](https://forum.sovol3d.com/categories.md) · [Tags](https://forum.sovol3d.com/tags.md)

**Page:** 2

---

## [Problem with the Touchscreen (unresponsive on one side)](https://forum.sovol3d.com/t/problem-with-the-touchscreen-unresponsive-on-one-side/3469)

<div class="topic-metadata">

**Author:** [@Beomagis](https://forum.sovol3d.com/u/Beomagis)\
**Replies:** 4\
**Last updated:** [October 9, 2023, 6:02pm UTC](https://forum.sovol3d.com/t/problem-with-the-touchscreen-unresponsive-on-one-side/3469 "2023-10-09T18:02:31Z")

</div>

Hello everyone New to 3D printing. Bought my SV01 Pro a week ago and mostly didn’t have issues beside my touchscreen: The middle right/bottom of the screen is unresponsive to touch seamingly. When I go to the preheat s…

---

## [SV01 Pro no USB connection to any computer](https://forum.sovol3d.com/t/sv01-pro-no-usb-connection-to-any-computer/1844)

<div class="topic-metadata">

**Author:** [@Yota](https://forum.sovol3d.com/u/Yota)\
**Replies:** 1\
**Last updated:** [September 22, 2023, 10:10pm UTC](https://forum.sovol3d.com/t/sv01-pro-no-usb-connection-to-any-computer/1844 "2023-09-22T22:10:47Z")

</div>

Decided to dive into Octoprint mostly for networking capabilities. USB connection is something I didn’t try before now. Annnnd…I cannot connect to this thing via Raspberry Pi, my desk top or my laptop. Windows doesn’t ev…

---

## [Sovol Sv01 Pro Pause at height It does not work properly](https://forum.sovol3d.com/t/sovol-sv01-pro-pause-at-height-it-does-not-work-properly/2419)

<div class="topic-metadata">

**Author:** [@Arthuru](https://forum.sovol3d.com/u/Arthuru)\
**Replies:** 1\
**Last updated:** [August 18, 2023, 6:22am UTC](https://forum.sovol3d.com/t/sovol-sv01-pro-pause-at-height-it-does-not-work-properly/2419 "2023-08-18T06:22:57Z")

</div>

When adding post processing in the cura slicer, pause at height, printing stops at the specified height, but does not print again, on the lcd screen the printing percentage stops. When the nozzle is already stopped, when…

---

## [Cannot level bed - keypad isn’t working](https://forum.sovol3d.com/t/cannot-level-bed-keypad-isn-t-working/3270)

<div class="topic-metadata">

**Author:** [@Harder01](https://forum.sovol3d.com/u/Harder01)\
**Replies:** 0\
**Last updated:** [August 14, 2023, 2:01am UTC](https://forum.sovol3d.com/t/cannot-level-bed-keypad-isn-t-working/3270 "2023-08-14T02:01:39Z")

</div>

I am re-levelling the bed after moving the printer. Was finding that it would seem to be fairly level and then suddenly one corner would be super tight to the paper so would have to keep adjusting, but then suddenly the …

---

## [Extruder , issue](https://forum.sovol3d.com/t/extruder-issue/3177)

<div class="topic-metadata">

**Author:** [@Pym3d](https://forum.sovol3d.com/u/Pym3d)\
**Replies:** 0\
**Last updated:** [July 29, 2023, 10:03am UTC](https://forum.sovol3d.com/t/extruder-issue/3177 "2023-07-29T10:03:06Z")

</div>

Good morning Sorry for my English but I use a translator to write to you. Possessor of the SV01 Pro since September 22, 2022, I have encountered problems with the extruder. It all started with the Hotbreak, which by the…

---

## [Extruder access](https://forum.sovol3d.com/t/extruder-access/3049)

<div class="topic-metadata">

**Author:** [@frequenttrav](https://forum.sovol3d.com/u/frequenttrav)\
**Replies:** 1\
**Last updated:** [July 20, 2023, 4:40am UTC](https://forum.sovol3d.com/t/extruder-access/3049 "2023-07-20T04:40:19Z")

</div>

does anyone know of intructions to dismantle extruder. I have some filament that broke as it entered the extruder and it will not unload. There is nothing left to pull it out. I need to take the extruder apart to remov…

---

## [Sv01pro extruder replacement](https://forum.sovol3d.com/t/sv01pro-extruder-replacement/2916)

<div class="topic-metadata">

**Author:** [@Markbrookes](https://forum.sovol3d.com/u/Markbrookes)\
**Replies:** 0\
**Last updated:** [June 23, 2023, 4:13pm UTC](https://forum.sovol3d.com/t/sv01pro-extruder-replacement/2916 "2023-06-23T16:13:48Z")

</div>

I have been looking for a replacement extruder for my sv01pro. Please help, right now it’s just a big paper weight…

---

## [Having major issues with my prints since I got the printer](https://forum.sovol3d.com/t/having-major-issues-with-my-prints-since-i-got-the-printer/1361)

<div class="topic-metadata">

**Author:** [@rmiddle](https://forum.sovol3d.com/u/rmiddle)\
**Replies:** 2\
**Last updated:** [June 4, 2023, 1:26am UTC](https://forum.sovol3d.com/t/having-major-issues-with-my-prints-since-i-got-the-printer/1361 "2023-06-04T01:26:25Z")

</div>

I have been having trouble with my prints. At first, I thought it was the stand I had the printer on was causing the problem. I changed out everything that is generally a problem, but my prints still look like junk Bad…

---

## [Sv01 pro index](https://forum.sovol3d.com/t/sv01-pro-index/2644)

<div class="topic-metadata">

**Author:** [@Jasoncox](https://forum.sovol3d.com/u/Jasoncox)\
**Replies:** 0\
**Last updated:** [May 21, 2023, 5:38pm UTC](https://forum.sovol3d.com/t/sv01-pro-index/2644 "2023-05-21T17:38:28Z")

</div>

I have the sv01 pro and i have to replace the index/ extruder, the sv04 index works but gives option for right and left handed. Dose anyone know which one i need for it ? in U.S. if that matters.

---

## [SV O1 - TPU prints bad quality and soft](https://forum.sovol3d.com/t/sv-o1-tpu-prints-bad-quality-and-soft/1240)

<div class="topic-metadata">

**Author:** [@Kam25](https://forum.sovol3d.com/u/Kam25)\
**Replies:** 3\
**Last updated:** [May 3, 2023, 8:59pm UTC](https://forum.sovol3d.com/t/sv-o1-tpu-prints-bad-quality-and-soft/1240 "2023-05-03T20:59:58Z")

</div>

Hello, My TPU prints became suddenly soft and bad quality. I already try to change temperature, dry the TPU, buy new one still same result Can someone tell me what to do plz ? Thanks for your time

---

## [Just got it and I am not impressed](https://forum.sovol3d.com/t/just-got-it-and-i-am-not-impressed/2398)

<div class="topic-metadata">

**Author:** [@Mrpissedoff](https://forum.sovol3d.com/u/Mrpissedoff)\
**Replies:** 0\
**Last updated:** [April 23, 2023, 1:09am UTC](https://forum.sovol3d.com/t/just-got-it-and-i-am-not-impressed/2398 "2023-04-23T01:09:31Z")

</div>

I read a ton of reviews before before choosing this unit. Got it put together final got it balanced and now the the filament won’t stick to the “BRAND NEW” plate. The first one I did was not as balanced as is now and a…

---

## [Source Code Firmware](https://forum.sovol3d.com/t/source-code-firmware/1968)

<div class="topic-metadata">

**Author:** [@Dexmoachin](https://forum.sovol3d.com/u/Dexmoachin)\
**Replies:** 3\
**Last updated:** [April 22, 2023, 11:53am UTC](https://forum.sovol3d.com/t/source-code-firmware/1968 "2023-04-22T11:53:55Z")

</div>

So I messed up my hotend/extruder while moving and swapped in an Ender 3 all metal direct drive extruder and I’ve been trying to get the CR Touch working since it’s on the other side of the hotend. I can’t seem to get th…

---

## [Uneven extrusion](https://forum.sovol3d.com/t/uneven-extrusion/2366)

<div class="topic-metadata">

**Author:** [@ThR4z0r](https://forum.sovol3d.com/u/ThR4z0r)\
**Replies:** 0\
**Last updated:** [April 20, 2023, 5:51pm UTC](https://forum.sovol3d.com/t/uneven-extrusion/2366 "2023-04-20T17:51:46Z")

</div>

Hi, lately my first layers have been coming out like this, specially the brim layer getting gaps all over the length, this only happens on the sides of the print, and the infill ends up very weak closer to the walls o…

---

## [Need to re-level after every print](https://forum.sovol3d.com/t/need-to-re-level-after-every-print/2223)

<div class="topic-metadata">

**Author:** [@ThR4z0r](https://forum.sovol3d.com/u/ThR4z0r)\
**Replies:** 2\
**Last updated:** [April 13, 2023, 3:53am UTC](https://forum.sovol3d.com/t/need-to-re-level-after-every-print/2223 "2023-04-13T03:53:37Z")

</div>

Had the printer for about 6 months, and I end up having to re-level the bed after every big print (30 cm prints), and lately the problem has gotten worse, so much that now i need to re-level after every 3 small or medium…

---

## [Mintemp and mintemp bed error](https://forum.sovol3d.com/t/mintemp-and-mintemp-bed-error/154)

<div class="topic-metadata">

**Author:** [@MoOsSaA](https://forum.sovol3d.com/u/MoOsSaA)\
**Replies:** 8\
**Last updated:** [April 9, 2023, 2:44pm UTC](https://forum.sovol3d.com/t/mintemp-and-mintemp-bed-error/154 "2023-04-09T14:44:56Z")

</div>

Hi everybody, While cleaning the heating head following a blockage, I made a short circuit. after that a mintemp error is displayed. Nozzle and bed stay at 0 degrees. I changed the hotend with the sovol extruder hotend…

---

## [Small Holes at Seam](https://forum.sovol3d.com/t/small-holes-at-seam/1741)

<div class="topic-metadata">

**Author:** [@3Dtron](https://forum.sovol3d.com/u/3Dtron)\
**Replies:** 1\
**Last updated:** [February 22, 2023, 3:48am UTC](https://forum.sovol3d.com/t/small-holes-at-seam/1741 "2023-02-22T03:48:10Z")

</div>

Hi, Do you have any advice on how to fix this this small holes at the seam. It appears to me that the holes occur when a new layer starts printing. The print is nearly perfect otherwise. Except for this small holes. …

---

## [User Interface Locked up](https://forum.sovol3d.com/t/user-interface-locked-up/1456)

<div class="topic-metadata">

**Author:** [@jlsmith1000](https://forum.sovol3d.com/u/jlsmith1000)\
**Replies:** 3\
**Last updated:** [February 1, 2023, 6:31am UTC](https://forum.sovol3d.com/t/user-interface-locked-up/1456 "2023-02-01T06:31:22Z")

</div>

The user interface is locked on the SV01 PRO initial screen and there doesn’t seem to be away around it. Tried flashing it, nothing, won’t boot to the SD card to flash the UI, and trying to start with reflashing the pri…

---

## [Layer shift after pause](https://forum.sovol3d.com/t/layer-shift-after-pause/1340)

<div class="topic-metadata">

**Author:** [@ThR4z0r](https://forum.sovol3d.com/u/ThR4z0r)\
**Replies:** 3\
**Last updated:** [January 30, 2023, 3:40am UTC](https://forum.sovol3d.com/t/layer-shift-after-pause/1340 "2023-01-30T03:40:17Z")

</div>

I have an SV01 Pro, and when I run out of filament, or manually pause my printer and resume printing it always offsets by a few millimeters on the Y axis ruining the whole print, no matter how many times I pause it, when…

---

## [SV01 Pro Optical filament runout sensor not working](https://forum.sovol3d.com/t/sv01-pro-optical-filament-runout-sensor-not-working/1286)

<div class="topic-metadata">

**Author:** [@ThR4z0r](https://forum.sovol3d.com/u/ThR4z0r)\
**Replies:** 1\
**Last updated:** [January 13, 2023, 2:27am UTC](https://forum.sovol3d.com/t/sv01-pro-optical-filament-runout-sensor-not-working/1286 "2023-01-13T02:27:18Z")

</div>

Just bought an SV01 pro 3 months ago, and the filament sensor keeps alerting me that there’s no filament, when there clearly is a lot of filament left and the blue light is on any help? Also, when manually feeding the fi…

---

## [Build plate replacement](https://forum.sovol3d.com/t/build-plate-replacement/1270)

<div class="topic-metadata">

**Author:** [@ImTheLiquor](https://forum.sovol3d.com/u/ImTheLiquor)\
**Replies:** 2\
**Last updated:** [January 12, 2023, 7:51am UTC](https://forum.sovol3d.com/t/build-plate-replacement/1270 "2023-01-12T07:51:46Z")

</div>

I feel like no one else really mentions this, but the included build plate for the SV01 Pro is absolutely terrible. The official alternative is also very, very bad. They’re both a hassle to use and very easy to damage. S…

---

## [Filament runout sensor support in Octoprint](https://forum.sovol3d.com/t/filament-runout-sensor-support-in-octoprint/1114)

<div class="topic-metadata">

**Author:** [@arminth](https://forum.sovol3d.com/u/arminth)\
**Replies:** 3\
**Last updated:** [December 30, 2022, 2:45am UTC](https://forum.sovol3d.com/t/filament-runout-sensor-support-in-octoprint/1114 "2022-12-30T02:45:51Z")

</div>

Is there a possibility to make the filament runout sensor work in Octoprint? It seems that the non standardard implementation of the DWIN touchscreen breaks a lot of Marlin functionalities! Other than that, a great pri…

---

## [Is there a way to setup the SV01 Pro to be on the network?](https://forum.sovol3d.com/t/is-there-a-way-to-setup-the-sv01-pro-to-be-on-the-network/151)

<div class="topic-metadata">

**Author:** [@Hurrikain](https://forum.sovol3d.com/u/Hurrikain)\
**Replies:** 6\
**Last updated:** [December 1, 2022, 8:10pm UTC](https://forum.sovol3d.com/t/is-there-a-way-to-setup-the-sv01-pro-to-be-on-the-network/151 "2022-12-01T20:10:41Z")

</div>

Was wondering if there is a way to make the Pro a network device? I really hate having to load the file on the card, and transfer it to the machine… Thanks!

---

## [Sovol sv1 Pro](https://forum.sovol3d.com/t/sovol-sv1-pro/915)

<div class="topic-metadata">

**Author:** [@Resanders](https://forum.sovol3d.com/u/Resanders)\
**Replies:** 1\
**Last updated:** [November 30, 2022, 4:29pm UTC](https://forum.sovol3d.com/t/sovol-sv1-pro/915 "2022-11-30T16:29:48Z")

</div>

I seem to be having a problem to turn on my printer. It goes to the boot screen and then it freezes. Is there anyway I can fix this? Does anyone have advice?

---

## [Stock heartbreak from SV01 Pro](https://forum.sovol3d.com/t/stock-heartbreak-from-sv01-pro/672)

<div class="topic-metadata">

**Author:** [@CotOTK](https://forum.sovol3d.com/u/CotOTK)\
**Replies:** 1\
**Last updated:** [October 22, 2022, 2:01am UTC](https://forum.sovol3d.com/t/stock-heartbreak-from-sv01-pro/672 "2022-10-22T02:01:49Z")

</div>

Anyone know where I can get some stock heartbreaks for the Pro? Tried the bi-metal and had nothing but problems. Want to get some spare stock ones to have on hand

---

## [Part fan loudness](https://forum.sovol3d.com/t/part-fan-loudness/432)

<div class="topic-metadata">

**Author:** [@Atroz](https://forum.sovol3d.com/u/Atroz)\
**Replies:** 14\
**Last updated:** [October 11, 2022, 12:07pm UTC](https://forum.sovol3d.com/t/part-fan-loudness/432 "2022-10-11T12:07:00Z")

</div>

Hello, How loud should the SV-01 pro be? Mine sits at about 42db (@1m) idle and when the fan that cools the part is on full it goes to about 55db. That seems loud to me. I found a review that said he saw 42db when run…

---

## [What type of data card fits the ports on SV01 Pro?](https://forum.sovol3d.com/t/what-type-of-data-card-fits-the-ports-on-sv01-pro/602)

<div class="topic-metadata">

**Author:** [@cnr6400](https://forum.sovol3d.com/u/cnr6400)\
**Replies:** 4\
**Last updated:** [September 22, 2022, 7:55pm UTC](https://forum.sovol3d.com/t/what-type-of-data-card-fits-the-ports-on-sv01-pro/602 "2022-09-22T19:55:40Z")

</div>

The data ports on the front of my new SV01 Pro do not fit SD, micro SD (TF) cards, or USB 2.0 cables / memory sticks I have. What do they fit? can I use an adapter cable for USB 2.0 to whatever the port socket on the rig…

---

## [Nozzle crashes into the hotbed](https://forum.sovol3d.com/t/nozzle-crashes-into-the-hotbed/578)

<div class="topic-metadata">

**Author:** [@julius](https://forum.sovol3d.com/u/julius)\
**Replies:** 2\
**Last updated:** [September 15, 2022, 10:56am UTC](https://forum.sovol3d.com/t/nozzle-crashes-into-the-hotbed/578 "2022-09-15T10:56:47Z")

</div>

Today I changed the nozzle from my SOVOL 01 pro. Everything worked fine, but all of a sudden I can’t level the extruder: the nozzle crashes into the hotbed and makes a terrible noise. When I try to regulate the hight …

---

## [SV01 PRO giveaway](https://forum.sovol3d.com/t/sv01-pro-giveaway/129)

<div class="topic-metadata">

**Author:** [@sovol3d](https://forum.sovol3d.com/u/sovol3d)\
**Replies:** 2\
**Last updated:** [September 13, 2022, 10:14am UTC](https://forum.sovol3d.com/t/sv01-pro-giveaway/129 "2022-09-13T10:14:17Z")

</div>

Hello guys, We have a giveaway for SV01 PRO now. You can click the link below to enter this campaign.

---

## [Sovol SV01 Pro Extruder dimensions fix in Cura](https://forum.sovol3d.com/t/sovol-sv01-pro-extruder-dimensions-fix-in-cura/564)

<div class="topic-metadata">

**Author:** [@tschlutter](https://forum.sovol3d.com/u/tschlutter)\
**Replies:** 2\
**Last updated:** [September 9, 2022, 8:19pm UTC](https://forum.sovol3d.com/t/sovol-sv01-pro-extruder-dimensions-fix-in-cura/564 "2022-09-09T20:19:55Z")

</div>

Hallo Friends, Since Sovol does not manage to create a Cura profile for the printer, here are the dimensions for the extruder. Cura / Settings / Printer / Manage Printers / Machine Settings / Printhead Settings x min …

---

## [Cura Slice Profile](https://forum.sovol3d.com/t/cura-slice-profile/555)

<div class="topic-metadata">

**Author:** [@Koir](https://forum.sovol3d.com/u/Koir)\
**Replies:** 0\
**Last updated:** [September 2, 2022, 11:31am UTC](https://forum.sovol3d.com/t/cura-slice-profile/555 "2022-09-02T11:31:12Z")

</div>

Hey Guys! I would like to know your settings to slice with cura. At the moment i stick to the default settings and get the best overall performance with 0.2 draft. Please post your ideas/profiles of the best overall s…

[Previous page](https://forum.sovol3d.com/c/sovol-sv01pro/31.md)

[Next page](https://forum.sovol3d.com/c/sovol-sv01pro/31.md?page=2)
